Garmin Appliance Data User's Guide Page 94

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 93
82 190-00607-02 Rev D
Detailed Operation
selected on the external GPS navigator, with additional
airports listed based on a nearest to destination search.
Airports and approach charts that are not geo-refer-
enced will not be shown for selection on this menu.
NOTE: Prior to loading an approach chart, there
is an operational benefit to selecting the desired
airport on the GPS navigator as the destination
waypoint. The GMX 200 can then detect this and
will place the corresponding airport at the top of
the airport list.
The remaining number of airports within the list
will vary depending on the complexity of the data-
base within the current region and the number of
geo-referenced approach charts associated with the
airports in the area. The GMX 200 performs a complex
filtering process that eliminates airports and associated
approach charts that are not geo-referenced, based on
present position.
Loading the Approach Chart
Once the airport is selected, the individual
approach chart to be overlaid can be loaded from a
list of geo-referenced approach charts available for
that airport. Not all approach charts can be overlaid
in this fashion and only geo-referenced charts will be
presented for selection from the Custom Map. Because
of this, it is possible that approach charts that are
viewable under the ChartView Function may not be
presented in this list.
NOTE: The pilot must be aware that not all charts
in the loaded database can be used as an overlay.
Once the approach chart is loaded, a green Annun-
ciator will illuminate at the top of the screen indicating
the airport name and specific chart that has been loaded.
Selecting an Approach Chart in the IFR Function
Overlay Chart Loading Example
1. Press FN and then MAP or IFR.
2. Press MENU/ENT and then the Load Chart
key.
Selecting an Approach Chart in the IFR Function
3. Highlight the desired airport with the arrow
keys and then press the Select key.
ChartView - Chart
Page view 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 147 148

Comments to this Manuals

No comments