Garmin Appliance Data User's Guide Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
8 190-00607-02 Rev D
Getting Started
Data Flags
Basic Operation
Use the following items to get a basic feel for the
operation of the GMX 200. The basic steps for using
any of the separate functions of the GMX 200 are:
Turn the power on.
Adjust the brightness or leave in automatic
mode.
Check that all tests pass on the Start Up
screen.
Press the FN key to view available functions.
Each press of the FN key will step through
the lists of functions.
Press the key below the function label to
select the desired function.
• Confirm or enter the current barometric pres-
sure (if prompted).
Press the MENU/ENT key to display available
options.
Press the Menu Item key next to the dis-
played option to choose desired capabilities.
Some options use multiple key presses for dif-
ferent states for the option. Press the MENU/
ENT key again to extinguish the option
display.
Refer to the Detailed Operation section for
more details on each function.
Start Up Screen
The Start Up screen is displayed while the
GMX 200 goes through its initialization and testing
routines. System information is shown that provides
the GMX 200 software, hardware, and database ver-
sions. The results of the self test are shown. A check
mark shows that the test passed. If any of the Self-Tests
fail (red “x”), contact your dealer or the factory.
Start Up Screen After Passing Tests.
Hardware version will vary depending on the configuration.
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 147 148

Comments to this Manuals

No comments