Garmin Appliance Data User's Guide Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
9190-00607-02 Rev D
Getting Started
Start Up and Baro Correction
Confirm Current Baro Correction
When the altitude source is an altitude encoder, a
window that displays the current barometric value will
appear after you press the first “smart” key, and then
every 30 minutes. This window will not appear when
GPS altitude is used. You must verify the current value
or enter a new value. Press + or turn the rotary knob
clockwise to increase the value. Press - or turn the
rotary knob counter-clockwise to decrease the value.
Press OK to confirm the existing values or to accept
changes you have just entered.
Barometric Pressure Confirmation
Function Selection
Press the FN key to view the different Functions.
The functions are shown above the function “smart”
keys on the lower part of the display in blue. Press
the function key under the function label to activate
that function. The labels above the function key will
change to reflect the custom “smart” controls for that
function (in green). All of the described functions may
not be available in each installation.
Function Description
MSG Message Log Function
MAP Custom Map Function
IFR IFR En Route Map
VFR VFR Sectional Map
SPLIT Split Screen (Displays Two
Functions)
TRAF Traffic Display
FPL Flight Plan Information
TER Terrain Depiction
FIS Flight Information Service
- Graphic and Text Weather
XM XM Satellite Radio Audio
LT Lightning Detection and
Reporting
CHART Chart (FliteChart) or
Chart (ChartView)
RADAR Weather Radar Function
SYS System Information
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 147 148

Comments to this Manuals

No comments