Garmin G1000 Mooney M20TN User Manual download pdf (Page 51)

190-00647-00 Rev. A

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

2-5

FLIGHT INSTRUMENTS

VSPEED REFERENCES

NOTE: Refer to the AFMS for Vspeed values.

Vspeeds (Glide, V

, V

, and V

) can be changed and their ﬂags turned on/off from the Timer/References

Window. When active (on), the Vspeeds are displayed at their respective locations to the right of the airspeed

scale. By default, all Vspeed values are reset and all ﬂags turned off when power is cycled.

Changing Vspeeds and turning Vspeed ﬂags on/off:

1) Press the

TMR/REF

Softkey.

2) Turn the

large FMS

Knob to highlight the ﬁeld of the desired Vspeed to be changed.

3) Use the FMS Knob to enter the desired value and press the

ENT

Key (when a speed has been changed from a

default value, an asterisk appears next to the speed).

4) With the ﬂag ON/OFF ﬁeld highlighted, turn the

small FMS

Knob clockwise to ON or counterclockwise to OFF.

5) To remove the window, press the

CLR

Key or the

TMR/REF

Softkey.

Figure 2-5 Timer/References Window Figure 2-6 Timer/References Menu

Turning all Vspeed ﬂags on/off:

1) Press the

TMR/REF

Softkey.

2) Press the

Key.

3) To activate all Vspeed ﬂags, press the ENT Key with ‘All References On’ highlighted.

4) To remove all Vspeed ﬂags, turn the FMS Knob to highlight ‘All References Off’ and press the

ENT

Key.

Restoring all Vspeed defaults:

1) Press the

TMR/REF

Softkey.

2) Press the

Key.

3) Turn the

FMS

Knob to highlight ‘Restore Defaults’ and press the

ENT

Key.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 379 380

Comments to this Manuals

No comments

Garmin G1000 Mooney M20TN User Manual Page 51

Comments to this Manuals

Related products and manuals for Air equipment Garmin G1000 Mooney M20TN