Garmin G1000 Mooney M20TN User Manual Page 296

  • Download
  • Add to my manuals
  • Print
  • Page
    / 380
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 295
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
190-00647-00 Rev. A6-60
HAZARD AVOIDANCE
SWITCHING FROM STANDBY MODE
The unit must be in operating mode for traffic to be displayed. The ability to switch out of standby into
operating mode on the ground is especially useful for scanning the airspace around the airport before
takeoff.
Switching to operating mode from standby mode:
1) On the Traffic Page, press the
OPERATE
Softkey or press the MENU Key.
2) Turn the small
FMS
Knob
to select ‘Operating Mode’.
3) If ‘Operating Mode’ is selected from the FMS menu, press the
ENT
Key to confirm and place SKYWATCH in
operating mode.
4) To switch to Standby Mode from the Traffic Page, press the STANDBY Softkey.
ALTITUDE DISPLAY MODE
Changing the altitude display mode:
1) On the Traffic Page, press the
ALT MODE
Softkey.
2) Press one of the following softkeys:
BELOW
NORMAL
ABOVE
UNREST
3) Press the BACK Softkey to return to the main Traffic Page.
OR:
1) Press the MENU Key.
2) Turn the small
FMS
Knob
to select one of the following:
BELOW
NORMAL
ABOVE
UNRESTRICTED
3) Press the ENT Softkey.
Page view 295
1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 379 380

Comments to this Manuals

No comments