Garmin G1000 Mooney M20TN User Manual Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 380
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
190-00647-00 Rev. A
Garmin G1000 Pilot’s Guide for the
Mooney M20M/M20R/M20TN4-22
AUDIO PANEL AND CNS
ADF/DME TUNING (OPTIONAL)
NOTE: When another window is turned on, the ADF/DME Tuning Window is replaced on the PFD.
The G1000 System tunes the optional ADF receiver and DME transceiver. The ADF is tuned by entering the
frequency in the ADF standby frequency field of the ADF/DME Tuning Window. (The softkey may be labeled
ADF/DME, ADF, or DME, depending on installed equipment.)
The UHF DME frequency is tuned by pairing with a VHF NAV frequency. DME frequency pairing is automatic
and only the VHF NAV frequency is shown.
The following ADF/DME information is displayed in the ADF/DME Tuning Window:
Active and standby ADF frequencies
ADF receiver mode
ADF receiver volume
DME tuning mode
When the ADF/DME Tuning Window is displayed, the selection cursor is placed over the standby ADF
frequency field.
Turning the large
FMS
Knob moves the selection cursor through the various fields (standby ADF frequency,
ADF receiver mode, ADF radio volume, and DME tuning mode). Pressing the
FMS
Knob activates/deactivates
the selection cursor in the ADF/DME Tuning Window. The ADF frequency is entered using the FMS Knob and
the ENT Key.
Figure 4-29 ADF/DME Tuning Window
Active ADF Frequency Standby ADF Frequency
ADF
Mode
DME
Mode
ADF
Volume
Page view 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 379 380

Comments to this Manuals

No comments