Garmin G1000 Mooney M20TN User Manual Page 68

  • Download
  • Add to my manuals
  • Print
  • Page
    / 494
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 67
190-00647-01 Rev. B
Garmin G1000 Pilot’s Guide for the
Mooney M20M/M20R/M20TN
57
FLIGHT INSTRUMENTS
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
OBS MODE
NOTE: VNV is inhibited while automatic waypoint sequencing has been suspended.
Enabling Omni-bearing Selector (OBS) Mode suspends the automatic sequencing of waypoints in a GPS
flight plan (GPS must be the selected navigation source), but retains the current Active-to waypoint as the
navigation reference even after passing the waypoint. OBS is annunciated to the lower right of the aircraft
symbol when OBS Mode is selected.
While OBS is enabled, a course line is drawn through the Active-to waypoint on the moving map. If
desired, the course to/from the waypoint can now be adjusted. When OBS Mode is disabled, the GPS flight
plan returns to normal operation, with automatic sequencing of waypoints, following the course set in OBS
Mode. The flight plan on the moving map retains the modified course line.
Figure 2-24 Omni-bearing Selector (OBS) Mode
Pressing the
OBS
Softkey Again, Returns
to Normal Operation
GPS
Selected
OBS
Mode
Enabled
Extended
Course
Line
Pressing the
OBS
Softkey Suspends
Waypoint Sequencing
Page view 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 493 494

Comments to this Manuals

No comments