Garmin G1000 Mooney M20TN User Manual download pdf (Page 47)

100

101

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN

190-00647-01 Rev. B36

SYSTEM OVERVIEW

SYSTEM

OVERVIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO PANEL

& CNS

FLIGHT

MANAGEMENT

HAZARD

AVOIDANCE

AFCS

ADDITIONAL

FEATURES

APPENDICESINDEX

1.8 DISPLAY BACKLIGHTING

The backlighting of the PFD and MFD displays and bezel and Audio Panel keys can be adjusted automatically or

manually. The default setting (automatic backlighting adjustment) uses photocell technology to automatically adjust

for ambient lighting conditions. Photocell calibration curves are pre-conﬁgured to optimize display appearance

through a broad range of cockpit lighting conditions. Manual backlighting adjustment can be accomplished using

the existing instrument panel dimmer bus or the following procedures. In normal operating mode, backlighting

can only be adjusted from the PFD. In Reversionary Mode, it can be adjusted from the remaining display.

Adjusting display backlighting:

1) Press the PFD

Key to display the PFD Setup Menu. ‘AUTO’ is now highlighted next to ‘PFD DSPL’.

2) Turn the

small FMS

Knob to select ‘MANUAL’.

3) Press the

ENT

Key.

4) With the intensity value now highlighted, enter the desired backlighting then press the

ENT

Key.

5) Turn the

large FMS

Knob to highlight ‘AUTO’ next to ‘MFD DSPL’ and repeat steps 2-4.

6) To remove the menu, press the

CLR

Key.

Adjusting key backlighting:

1) Press the PFD

Key to display the PFD Setup Menu. ‘AUTO’ is now highlighted next to ‘PFD DSPL’.

2) Turn the

large FMS

Knob to highlight ‘PFD DSPL’.

3) Turn the

small FMS

Knob in the direction of the green arrowhead to display ‘PFD KEY’.

4) Turn the

large FMS

Knob to highlight ‘AUTO’.

5) Turn the

small FMS

Knob to select ‘MANUAL’.

6) Press the

ENT

Key.

7) With the intensity value now highlighted, enter the desired backlighting and press the

ENT

Key.

8) Turn the

large FMS

Knob to highlight ‘MFD DSPL’.

9) Turn the

small FMS

Knob in the direction of the green arrowhead to display ‘MFD KEY’ and repeat steps 4-7.

10) To remove the menu, press the

CLR

Key.

Figure 1-38 PFD Setup Menu

PFD

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 493 494

Comments to this Manuals

No comments

Garmin G1000 Mooney M20TN User Manual Page 47

Comments to this Manuals

Related products and manuals for Air equipment Garmin G1000 Mooney M20TN