Garmin G1000 Mooney M20TN User Manual Page 388

  • Download
  • Add to my manuals
  • Print
  • Page
    / 494
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 387
190-00647-01 Rev. B
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
377
AUTOMATIC FLIGHT CONTROL SYSTEM
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
OVERSPEED PROTECTION
NOTE: Overspeed protection is not active in Altitude Hold, Glideslope or Glidepath Modes.
While Pitch Hold, Vertical Speed, Flight Level Change, Vertical Path Tracking, or an altitude capture mode is
active, airspeed is monitored by the flight director and pitch commands are limited for overspeed protection.
Overspeed protection is provided in situations where the flight director cannot acquire and maintain the mode
reference for the selected vertical mode without exceeding the certified maximum autopilot airspeed.
When an autopilot overspeed condition occurs, the Airspeed Reference appears in a box above the Airspeed
Indicator, flashing a yellow ‘MAXSPD’ annunciation. Engine power should be reduced and/or the pitch reference
adjusted to slow the aircraft. The annunciation disappears when the overspeed condition is resolved.
Airspeed
Indicator
Figure 7-41 Overspeed Annunciation
Page view 387
1 2 ... 383 384 385 386 387 388 389 390 391 392 393 ... 493 494

Comments to this Manuals

No comments