Garmin G1000 Cockpit Reference Guide for the Piper PA32
10-1
SECTION 10 – HAZARD
AVOIDANCE
SECTION 10: HAZARD AVOIDANCE
10.1 CUSTOMIZING THE HAZARD
DISPLAYS ON THE NAVIGATION MAP
1)
With the Navigation Map Page displayed, press
the
MENU
Key to display the Navigation Map
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
2)
Press the
ENT
Key. The Map Setup Menu is
displayed. Turn the small
FMS
Knob to select
the ‘Weather’ group (Figure 10-2) to customize
the display of weather features. Select ‘Traffic’
to customize the display of traffic.
3)
Press the small
FMS
Knob to return to the
Navigation Map Page.
Figure 10-1 Page Menu
Figure 10-2 Map Setup Menu
Figure 10-3 Map Setup Group List
10.2 STORMSCOPE
®
(OPTIONAL)
WARNING: Weather information on the G1000
MFD is approved for weather avoidance only, not
weather penetration. Refer to the WX-500 Pilot’s
Guide for detailed operation.
Displaying Stormscope Lightning Data on the
Navigation Map Page
1)
Press the
MAP
Softkey.
2)
Press the
STRMSCP
Softkey. Press the
STRMSCP
Softkey again to remove Stormscope Lightning
Data from the Navigation Map Page.
Figure 10-4 In-Flight Navigation Map Page Displaying
Stormscope Lightning Data
Lightning Age Symbol
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Comments to this Manuals