Garmin Software Version 0648.02 User's Guide Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
Garmin G1000 Cockpit Reference Guide for the Piper PA32
4-4
SECTION 4 – NAV/COM &
TRANSPONDER
4.6 FREQUENCY AUTO-TUNING
Auto-tuning on the PFD
Figure 4-9 Nearest Airports Window (PFD)
1)
Press the
NRST
Softkey to display the Nearest
Airports Window.
2)
Turn either
FMS
Knob to highlight the desired
frequency.
3)
Press the
ENT
Key to place the frequency in the
standby field of the active COM.
4)
Press the
Frequency Transfer
Key to place the
frequency in the active field.
NAV frequencies are entered automatically in the active
NAV frequency field upon approach loading or approach
activation.
Auto-tuning on the MFD
Auto-tuning on the MFD is done in much the same way
as on the PFD. Use the FMS Knobs to select the desired
frequency on any of the information pages. Pressing the
ENT Key then loads the selected frequency in the tuning
box as a standby frequency.
4.7 TRANSPONDER
Mode Selection
The STBY, ON, ALT, GND, VFR, CODE, and IDENT
Softkeys can be accessed by pressing the
XPDR Softkey.
Ground Mode (Automatic or Manual)
GND is displayed when the aircraft is on the ground or
when the
GND Softkey is pressed. The transponder does
not allow Mode A and Mode C replies, but it does permit
acquisition squitter and replies to discretely address
Mode S interrogations.
Figure 4-10 Ground Mode
Standby Mode (Manual)
Press the
STBY Softkey. In Standby Mode, the tran-
sponder does not reply to interrogations, but new codes
can be entered.
STBY Mode (White
Code Number and
Mode)
Figure 4-11 Standby Mode
Manual ON Mode
Press the
ON Softkey. ON Mode generates Mode A
and Mode S replies, but Mode C altitude reporting is in-
hibited.
ON Mode
(No Altitude
Reporting)
Figure 4-12 ON Mode
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 141 142

Comments to this Manuals

No comments