Garmin Software Version 0648.02 User's Guide Page 97

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 96
Garmin G1000 Cockpit Reference Guide for the Piper PA32
9-3
SECTION 9 – PROCEDURES
Load and/or Activate an Approach Procedure
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight ‘SELECT
APPROACH’.
3)
Press the
ENT
Key.
4)
If a flight plan is active, the destination airport
will be displayed as the default. A list of available
approaches is also displayed. If no flight plan is
active, use the
FMS
Knobs to enter the identifier
of the desired airport. Press the
ENT
Key.
5)
Turn the large
FMS
Knob to highlight the
Approach field. Turn the small
FMS
Knob to
display a list of available approaches.
Figure 9-6 Selecting an Approach Procedure
6)
Turn either
FMS
Knob to highlight the desired
approach. Press the
ENT
Key.
7)
The cursor will move to the TRANSITIONS field.
Turn the large
FMS
Knob to highlight the desired
transition waypoint and press the
ENT
Key. (The
“Vectors” option assumes vectors will be received
to the final course segment of the approach and
will provide navigation guidance relative to the
final approach course.)
Figure 9-7 Selecting an Approach Transition
8)
Turn the large
FMS
Knob to highlight Activate?’
and press the
ENT
Key to activate the approach.
Selecting ‘Load?’ will add the procedure to the
flight plan without immediately using it for
navigation guidance.
Activate An Approach in the Active Flight Plan
1)
With the Navigation Map Page displayed, press
the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight ACTIVATE
APPROACH’.
3)
Press the
ENT
Key. The approach procedure is
now active.
Page view 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 141 142

Comments to this Manuals

No comments