Garmin G1000 Cockpit Reference Guide for the Piper PA32
SECTION 7 – NAVIGATION
7-29
3)
Press the
FMS
Knob to remove the flashing
cursor.
7.13 NEAREST USER WAYPOINT
Figure 7-65 Nearest User Waypoints Page
Select the Nearest User Waypoint Page
1)
Turn the large
FMS
Knob to select the ‘NRST’ page
group.
2)
Turn the small
FMS
Knob to select the fifth
rectangular page icon.
Select a Nearest User Waypoint
1)
With the Nearest User Waypoint Page displayed,
press the
FMS
Knob to activate the cursor. If any
previously entered User Waypoints are within 200
nm, these will be displayed with the closest listed
first.
2)
Turn either
FMS
Knob to select the desired
waypoint. The remaining information on the
Nearest User Waypoint Page pertains to the
selected Nearest User Waypoint.
3)
Press the
FMS
Knob to remove the flashing
cursor.
7.14 NEAREST FREQUENCIES
Figure 7-66 Nearest Frequencies Page
Select the Nearest Frequencies Page
1)
Turn the large
FMS
Knob to select the ‘NRST’ page
group.
2)
Turn the small
FMS
Knob to select the sixth
rectangular page icon.
Select and Load the Nearest ARTCC, FSS, or Weather
Frequency
1)
With the Nearest Frequencies Page displayed,
press the
ARTCC, FSS,
or
Wx
Softkey to place the
cursor in the appropriate field.
2)
Turn the
FMS
Knobs to select the desired facility
or frequency.
3)
Press the
ENT
Key to load the frequency into the
COM frequency standby field.
4)
Press the
FMS
Knob to remove the flashing
cursor.
Comments to this Manuals