Garmin Software Version 1308.07 User's Guide Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 194
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A 61
Procedures
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS FMS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
3)
Press the ENT Key or the small PFD Knob. The Select Arrival Window is
displayed.
4)
Use the PFD Knob to select an airport and press the ENT Key or the small
PFD Knob.
5)
Select an arrival from the list and press the ENT Key or the small PFD Knob.
6)
Select a runway (if required) and press the ENT Key or the small PFD Knob.
7)
Select a transition (if required) and press the ENT Key or the small PFD
Knob. ‘LOAD?’ is highlighted.
LOAD AND/OR ACTIVATE AN APPROACH PROCEDURE
NOTE: If certain GPS parameters (SBAS, RAIM, etc.) are not available, some
published approach procedures for the desired airport may not be displayed
in the list of available approaches.
Loading an approach into the active flight plan using the Touchscreen
Controller:
1)
From the Home Screen, touch PROC
2)
Touch the Approach Button to display the Approach Selection Screen.
3)
If necessary, touch the Airport Button to display the keypad and use it to
select the approach airport.
4)
Touch the Enter Button to accept the approach airport.
5)
If necessary, touch the Approach Button to display the Select Approach
Screen with a list of available approaches.
6)
Scroll the list if necessary and touch an approach selection button to select
the approach.
7)
If necessary, touch the Transition Button to display the Select Transition
Screen with a list of available transitions.
8)
Scroll the list if necessary and touch a transition selection button to select
the transition.
9)
To set the minimums, touch the Minimums Button to display the
Minimums Screen. If the minimums were Off, then Baro is automatically
selected.
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 193 194

Comments to this Manuals

No comments