Garmin Software Version 1308.07 User's Guide Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 194
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A
14
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSFMS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
1)
On the PFD Controller, press the COM/NAV Button to display the COM/
NAV Window on the PFD.
2)
Turn the large PFD Knob to move the cursor to the MIC field.
3)
Turn the small PFD Knob to select the desired COM.
4)
Press the COM/NAV Button to hide the COM/NAV Window.
Selecting a COM Radio for monitoring:
Touch the MON Button in the CNS Bar on the Touchscreen Controller to
monitor the COM not selected for transmission.
Or:
1)
Touch the Audio & Radios Button to display the Audio & Radios Screen.
2)
If necessary, touch the Copilot Tab.
3)
If necessary, touch the Sync to Pilot Button to disable synchronizing
selections to the pilot.
4)
Touch the COM1 Button or COM2 Button to select the COM1/COM2 radio
for monitoring.
COM FREQUENCY TUNING
Selecting a COM frequency using the Touchscreen Controller:
1)
Touch the COM1 STBY Button or COM2 STBY Button in the CNS Bar on
the Touchscreen Controller to display the COM1/COM2 Standby Screen.
2)
Use the keypad to select the frequency.
3)
Touch the Enter Button to accept the new frequency as the COM1/COM2
standby frequency; or touch the XFER Button to accept the new frequency
as the COM1/COM2 active frequency and transfer the previously active
frequency to the standby frequency.
Or:
1)
Touch the Audio & Radios Button to display the Audio & Radios Screen.
2)
Touch the COM1/COM2 frequency button to display the COM1/COM2
Standby Screen.
3)
Use the keypad to select the desired frequency.
4)
Touch the Enter Button to accept the new frequency as the COM1/COM2
standby frequency; or touch the XFER Button to accept the new frequency
as the COM1/COM2 active frequency and transfer the previously active
frequency to the standby frequency.
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 193 194

Comments to this Manuals

No comments