Garmin G1000 Socata TBM 850 User Manual download pdf (Page 46)

100

101

Garmin G1000 Pilot’s Guide for the Socata TBM 850

190-00709-00 Rev. A1-36

SYSTEM OVERVIEW

• Weight (pounds, kilograms)

Affects aircraft weights on the Weight Planning Page.

• Position (HDDD°MM.MM’, HDDD°MM’SS.S”, MGRS, UTM/UPS)

Affects all position displays.

To change a Display Units setting:

1) While on the System Setup Page, press the FMS Knob momentarily to activate the ﬂashing cursor.

2) Turn the large FMS Knob to highlight the desired ﬁeld in the Display Units Box.

3) Turn the small FMS Knob to select from a list of measurement units and press the ENT Key when the desired

unit is highlighted. Press the CLR Key to cancel the action without changing the units.

AIRSPACE ALERTS

The Airspace Alerts Box allows the pilot to turn the controlled/special-use airspace message alerts on

or off. This does not affect the alerts listed on the Nearest Airspaces Page or the airspace boundaries

depicted on the MFD Navigation Map Page. It simply turns on/off the warning provided when the aircraft

is approaching or near an airspace.

Alerts for the following airspaces can be turned on/off in the Airspace Alerts Box:

• Class B/TMA

• Class C/TCA

• Class D

• Restricted

• MOA (Military)

• Other airspaces

An altitude buffer is also provided which “expands” the vertical range above or below an airspace. For

example, if the buffer is set at 500 feet, and the aircraft is more than 500 feet above/below an airspace, an

alert message is not generated, but if the aircraft is less than 500 feet above/below an airspace and projected

to enter it, the pilot is notiﬁed with an alert message. The default setting for the altitude buffer is 200

feet.

To change the altitude buffer distance setting:

1) While on the System Setup Page, press the FMS Knob momentarily to activate the ﬂashing cursor.

2) Turn the large FMS Knob to highlight the altitude buffer ﬁeld in the Airspace Alerts Box.

3) Turn the FMS Knobs to enter an altitude buffer value and press the ENT Key.

To turn an airspace alert on or off:

1) While on the System Setup Page, press the FMS Knob momentarily to activate the ﬂashing cursor.

2) Turn the large FMS Knob to highlight the desired ﬁeld in the Airspace Alerts Box.

3) Turn the small FMS Knob clockwise to turn the airspace alert ON or counterclockwise to turn the alert OFF.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 541 542

Comments to this Manuals

No comments

Garmin G1000 Socata TBM 850 User Manual Page 46

Comments to this Manuals

Related products and manuals for Air equipment Garmin G1000 Socata TBM 850