Garmin G1000 Socata TBM 850 User Manual Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 542
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
190-00709-00 Rev. A
Garmin G1000 Pilot’s Guide for the Socata TBM 850
4-26
AUDIO PANEL AND CNS
ADF TUNING
ADF frequencies in the 190.0-kHz to 1799.5-kHz range are entered in the standby ADF frequency field of
the ADF/DME Tuning Window. The G1000 System does not tune the ADF emergency frequency, 2182.0-
kHz.
Tuning an ADF frequency:
1) Select the ADF/DME Softkey to display the ADF/DME Tuning Window.
2) Turn the large
FMS
Knob to place the selection cursor over the standby ADF frequency field.
3) Turn the small
FMS
Knob to begin data entry and change each digit.
4) Turn the large
FMS
Knob to move the cursor to the next digit position.
5) Press the
ENT
Key to complete data entry for the standby frequency.
Figure 4-30 Entering ADF Standby Frequencies
Press the
ENT
Key to
Complete ADF
Frequency Entry
Turn the Small
FMS
Knob to
Enter Data in
the Standby ADF
Frequency Field
Turn the Large
FMS
Knob
to Move the
Cursor to the
Next Character
Pressing the
CLR
Key before completing frequency entry cancels the frequency change and reverts back to
the previously entered frequency.
Pressing the
CLR
Key when the cursor is flashing, clears the frequency and replaces the standby field with
‘0000.0’.
Transferring the active and standby ADF frequencies:
1) Turn the large
FMS
Knob to place the selection cursor over the standby ADF frequency field.
2) Press the
ENT
Key to complete the frequency transfer.
Figure 4-31 Transferring ADF Frequencies
Press the
ENT
Key to Transfer
the ADF
Frequencies
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 541 542

Comments to this Manuals

No comments