Garmin GPSMAP 130 User Manual download pdf (Page 79)

To flush mount the GPSMAP 130:

1. Cut a 4.15” W x 4.67” H (105.4 x 118.6mm) hole in panel.

2. Place GPSMAP 130 into hole from the front until its flange rests against

the mounting surface.

3. From the back side of the panel, loosely attach the bracket so that the slot in the ratchet

area points away from the mounting panel.

4. Rotate the bracket downward until the panel is pinched tightly between the unit’s flange

and bracket lobe.

5. Tighten knobs and connect the power/data and antenna cables.

WARNING!

The temperature range for the GPSMAP 130 is -4 to

+158ºF (-20 to 70ºC). Extended exposure to temper-

atures exceeding this range (in storage or operating

conditions) may cause failure of the LCD screen. This

type of failure and related consequences are NOT

covered by the manufacturer’s limited warranty.

SECTION

APPENDIX

Installation

gps 130 7/23/98 9:23 AM Page 69

1 ... 78 79 80 ... 94

No comments

Garmin GPSMAP 130 User Manual Page 79