Garmin GPSMAP 130 User Manual download pdf (Page 16)

To mark your present position:

1. Press the

key. The mark position page will appear, with a default three-digit

waypoint name and symbol.

2. Use the

keypad to highlight the waypoint name field (001) and press

3. Press the LEFT ARROW of the

keypad to clear the name field.

4. Use the

keypad to enter the name ‘DOCK’, using the UP and DOWN arrows to select

each letter, and the RIGHT arrow key to advance to the next character position. If you

make a mistake and select an incorrect character, simply use the LEFT arrow key of the

keypad to backspace the cursor and correct the entry.

5. Press

to confirm the name.

6. The field highlight will advance to the symbol field. Press

to access the waypoint

symbol page.

7. Use the

keypad to highlight the ANCHOR symbol.

8. Press

to confirm the symbol.

9. Press

again to confirm the ‘DONE?’ prompt and save the waypoint.

The waypoint is now stored in memory. Note that waypoints may also be creat-

ed graphically from the map display and by manually entering position coordi-

nates. Both of these techniques are described in the reference section of the manu-

al and/or on your GPSMAP 130 quick reference guide. To continue our tour, let’s

move on to the map page.

1. Press the

key.

GETTING STARTED

Marking A Postion

A. The mark position page will automatically assign

a default three-digit name for each waypoint,

which can be changed at any time to an alphanu-

meric name containing up to six-characters.

B. A complete set of waypoint symbols allows you to

mark inland and offshore waypoints with a cus-

tom icon for fast waypoint recognition.

gps 130 7/23/98 9:21 AM Page 6

1 ... 15 16 17 ... 94

No comments

Garmin GPSMAP 130 User Manual Page 16