Bracket Install
Place the Rod Eye Mounting Bracket
(item 2) as shown in gure 5 against
the face of the Carrier (item 1). Install
the Hex Cap Screws (item 8) and split
Lock Washers (item 6) with some
thread lock through the bracket and
into the carrier and tighten the them.
Hang Carrier
Tip the motor all the way up. Slide the
Carrier for the Eye Mounting Bracket
(item 1) up between the latch brackets
and over the cross tube that joins them
as shown in gure 4.
Figure 4
Figure 5
4
Comments to this Manuals