Garmin Software Version 1308.10 User's Guide Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 196
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-02 Rev. A 75
Hazard Avoidance
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS FMS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Defining Weather Data Request Coverage Area:
1)
From the Home Screen, touch Weather > Weather Selection >
Connext Weather > Connext Settings.
2)
Touch the Define Coverage Button.
3)
To change the diameter and route width of the weather data request
coverage area, touch the Diameter/Width Button. Scroll as needed and
touch the desired distance button in the popup window.
4)
To include/remove the present position in the weather data request, touch
the P. POS Button to enable/disable.
5)
To include/remove any portion of the flight plan route in the weather data
request, touch the Flight Plan Button.
6)
To change distance of the flight plan to be used in the weather data
request, touch the Flight Plan Distance Button. Scroll as needed and touch
the desired distance of the flight plan to be used (‘Remaining FPL’ uses the
remainder of the flight plan, or select a specified look-ahead distance from
the list.)
7)
To include/remove a specific waypoint to be used in the weather data
request, touch the Waypoint Button.
a)
Touch the waypoint entry Button (to the right of the Waypoint
Button.)
b)
Using the Touchscreen Controller buttons or knobs, enter the desired
waypoint to include in the weather data request. Note the waypoint
may be off-route.
Issuing/Cancelling an Immediate Weather Data Request:
1)
From the Home Screen, touch Weather > Weather Selection >
Connext Weather > Connext Settings.
2)
Touch the Send Immediate Request Button. The system contacts
Garmin Flight Data Services and displays the status in the Data Request
Window. System displays ‘Completed’ when finished.
3)
If desired, touch the Cancel Immediate Request Button while a request
is occurring. Data Request window will display ‘Request Cancelled’.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 195 196

Comments to this Manuals

No comments