Garmin Software Version 1308.10 User's Guide Page 179

  • Download
  • Add to my manuals
  • Print
  • Page
    / 196
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 178
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-02 Rev. A
Appendix
163
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS FMS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
DATABASE MANAGEMENT
Database information is obtained from third party sources. Inaccuracies in the data
may be discovered from time to time. Garmin communicates this information by issu-
ing a Database Alert. These notifications are available on http://fly.garmin.com.
Garmin requests the flight crew report any observed discrepancies related to da-
tabase information. These discrepancies could come in the form of an incorrect pro-
cedure; incorrectly identified terrain, obstacles and fixes; or any other displayed item
used for navigation or communication in the air or on the ground. Go to http://fly.
garmin.com and select “Aviation Data Error Report”.
CAUTION: Never disconnect power to the system when loading a database. Power
interruption during the database loading process could result in maintenance
being required to reboot the system.
The system uses Secure Digital (SD) cards to load and store various types of data. For basic
flight operations, SD cards are required for database storage as well as Jeppesen navigation and
ChartView database updates. Not all SD cards are compatible with the G2000. Use only SD
cards supplied by Garmin or the aircraft manufacturer.
CAUTION: When downloading updates to the Jeppesen Navigation Database,
copy the data to an SD card other than a Garmin Supplemental Data Card.
Otherwise, data corruption can occur.
NOTE: When loading database updates, the ‘DB Mismatch’ message will be
displayed until database synchronization is complete, followed by turning system
power off, then on. Synchronization can be monitored on the Avionics Status
Screen on the Touchscreen Controller.
NOTE: Loading a database in the system prior to its effective date will result in
the expiration date on the power-up screen and the effective date on the Avionics
Status Screen being displayed in yellow.
Jeppesen Databases
The Jeppesen navigation database is updated on a 28-day cycle. The ChartView
database is updated on a 14-day cycle. If the ChartView database is not updated
within 70 days of the expiration date, ChartView will no longer function. Both of these
databases are provided directly from Jeppesen.
Page view 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 195 196

Comments to this Manuals

No comments