Garmin Software Version 1308.10 User's Guide Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 196
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-02 Rev. A 17
Nav/Com/XPDR/Audio Panel
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS FMS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
3)
If necessary, touch the Sync to Pilot Button to disable synchronizing
selections to the pilot.
4)
Touch the NAV1 or NAV2 Button on the Audio & Radios Screen to select/
deselect the radio for monitoring.
NAV RADIO TUNING
Selecting a NAV frequency using the Touchscreen Controller:
1)
Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2)
Touch the NAV1/NAV2 frequency button to select NAV1/NAV2 for tuning,
and display the NAV1/NAV2 frequency tuning screen.
3)
Use the keypad to select the desired frequency.
4)
Touch the Enter Button to enter the new frequency as the NAV1/NAV2
standby frequency; or touch the XFER Button to enter the new frequency as
the NAV1/NAV2 standby frequency and transfer it to the active frequency.
Or:
1)
Touch the Audio & Radios Button to display the Audio & Radios Screen.
2)
Touch the NAV1/NAV2 volume slider to select NAV1/NAV2 for tuning.
3)
Turn the large and small right knobs to tune the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).
4)
Press the small right knob to enter the new frequency as the NAV1/NAV2
standby frequency; or press and hold the small right knob to transfer the
new standby frequency to the active frequency.
Selecting a NAV frequency using the PFD Controller:
1)
On the PFD Controller, press the COM/NAV Button to display the COM/
NAV Window.
2)
Turn the large PFD Knob to move the cursor to the SOURCE field.
3)
Turn either PFD Knob to select the desired NAV.
4)
Press the ENT Key or the small PFD Knob to accept the selection and move
the cursor to the STBY frequency field.
5)
Turn the small PFD Knob one click to activate the editing cursor (flashing).
6)
Turn the large and small PFD knobs to tune the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 195 196

Comments to this Manuals

No comments