Garmin Software Version 0500.00 User's Guide download pdf (Page 16)

Garmin G1000 Cockpit Reference Guide for the Beechcraft 58/G58

1-4

SECTION 1

SYSTEM OVERVIEW

(16) ENT Key – Accepts a menu selection or data entry.

This key is used to approve an operation or complete data

entry. It is also used to conﬁrm selections and information

entries.

(17) Dual ALT Knob – Sets the reference altitude in

the box located above the Altimeter. The large knob

selects the thousands, while the small knob selects the

hundreds. Selected altitude provides an altitude setting

for the Altitude Capture/Hold mode, in addition to the

standard G1000 altitude alerter function.

(18) AP Key – Engages/disengages the Autopilot and

Flight Director in the default vertical and lateral modes.

(19) FD Key – Activates/deactivates the Flight Director

only. Pressing the

FD key turns on the Flight Director in

the default vertical and lateral modes. Pressing the FD

key again deactivates the Flight Director and removes the

command bars, unless the Autopilot is engaged. If the

Autopilot is engaged, the FD key is disabled.

(20) NAV Key

– Selects/deselects the Navigation mode.

(21) ALT Key – Selects/deselects the Altitude Hold

mode.

(22) VS Key – Selects/deselects the Vertical Speed mode.

(23) FLC Key – Selects/deselects the Flight Level Change

mode.

(24) YD Key – Engages/disengages the Yaw Damper.

(25) HDG Key – Selects/deselects the Heading Select

mode.

(26) APR Key – Selects/deselects the Approach mode.

(27, 28) NOSE UP/NOSE DN Keys – Controls the

active pitch reference for the Pitch Hold, Vertical Speed,

and Flight Level Change modes.

1.2 PFD SOFTKEYS

Softkey OFF

Softkey ON

OBS

TMR/REF

NRST

INSET

IDENT

XPDR

CDI

PFD

ALERTS

DME

(optional)

Figure 1-2 PFD Top Level Softkeys

INSET – Press to display the Inset Map in the lower

left corner of the PFD.

OFF

– Press to remove the Inset Map

DCLTR

(3) – Press momentarily to select the desired

amount of map detail. The declutter level appears

adjacent to the DCLTR softkey.

• No declutter: All map features are visible

• Declutter – 1: Declutters land data

• Declutter – 2: Declutters land and SUA data

• Declutter – 3: Declutters large NAV data remaining

(removes everything except the active ﬂight plan)

TRAFFIC

– Press to display TIS trafﬁc on the map.

TOPO

– Press to display topographical data (i.e.,

coastlines, terrain, rivers, lakes, etc.) and

elevation scale on the inset map.

TERRAIN

– Press to display terrain information on

the inset map.

STRMSCP (optional)

– Press to display the

Stormscope lightning data on the inset map

(within a 200 nm radius of the aircraft).

NEXRAD (optional)

– Press to display NEXRAD

precititation data on the inset map.

XM LTNG (optional)

– Press to display the XM Radio

lightning data on the inset map.

BACK

– Press to return to the previous level softkey

conﬁguration.

PFD – Press to display the additional softkeys for

additional conﬁgurations to the PFD.

METRIC

– Press to display the current and reference

altitudes in meters, in addition to feet. Pressing

the metric softkey also changes the barometric

setting to hectopascals.

DFLTS

– Press to reset default settings on the PFD.

DME

(optional) – Press to display the DME

information window.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 131 132

Comments to this Manuals

No comments

Garmin Software Version 0500.00 User's Guide Page 16

Comments to this Manuals

Related products and manuals for Navigators Garmin Software Version 0500.00