Garmin Software Version 0500.00 User's Guide Page 103

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 102
Garmin G1000 Cockpit Reference Guide for the Beechcraft 58/G58
10-19
SECTION 10 – HAZARD
AVOIDANCE
On the Vertical Scan Display
1. Press the
TILT
softkey to activate the cursor in
the TILT field and display the Tilt Line.
If the Tilt Line is not displayed, press the
MENU
key and turn the
large FMS
knob to select
‘Show Tilt Line’. Press the
ENT
key.
2. Turn the
small FMS
knob to adjust the antenna
tilt angle. The selected tilt angle will be
implemented when Horizontal Scan is again
selected.
Vertically Scan a Storm Cell
1. While in the Horizontal Scan view, press the
BRG
softkey. This will place the cursor in the
BEARING field and display the Bearing Line.
If the Bearing Line is not displayed, press the
MENU
key and turn the
large FMS
knob to select
‘Show Bearing Line’. Press the
ENT
key.
2. Turn the
small FMS
knob to place the Bearing
Line on the desired storm cell, or other area,
to be vertically scanned.
3. Press the
VERTICAL
softkey. A vertical ‘slice’ of
the selected area will now be displayed.
4. The
small FMS
knob may be used to move the
scanned ‘slice’ a few degrees right or left.
5. Turn the Joystick to adjust the range.
6. Press the
FMS
knob to remove the cursor.
7. To select a new area to be vertically scanned,
press the
HORIZON
softkey to return to the
Horizontal Scan view and repeat the previous
steps.
Figure 10-30 Bearing Line on Horizontal Scan
Bearing Line
Scan Line
Figure 10-31 Vertical Scan Display
Page view 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 131 132

Comments to this Manuals

No comments