Garmin GNS 530 User Manual download pdf (Page 99)

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

SECTION 6

PROCEDURES

6-17

Vectors to Final

Take a second look at the ‘VOR 22’ approach into

Billard Municipal. Instead of following the DME arc, ATC

tells the pilot to expect vectors onto the nal approach

course. There are several ways to select ‘vectors to nal’

with the GNS 530. The ﬁrst two options below normally

require the least workload to accomplish:

• When the approach is rst selected, choose

‘VECTORS’ from the Transitions Window.

• Load a full approach (including the IAF from the

Transitions Window) as described in Section 6.1.

When cleared, press the PROC Key and select

‘Activate Vectors-To-Final?’.

• Load the full approach as described in Section

6.1. Use the Direct-to Key (by pressing it twice)

from the Active Flight Plan Page to select the

desired leg of the approach.

Selecting ‘VECTORS’ from the Transitions

Window:

1) Select Billard Municipal (KTOP) as the

destination, using the Direct-to Key, or as the

last waypoint in a ﬂight plan.

2) Press the PROC Key and select the ‘VOR 22’

approach using the steps outlined in Section

6.1.

3) From the Transitions Window, select ‘VECTORS’

(Figure 6-41).

Figure 6-41 Transitions Window

4) Select ‘Load?’ (or ‘Activate?’, if already cleared

for the approach).

Activating vectors-to-ﬁnal from the

Procedures Page:

1) Select Billard Municipal (KTOP) as the

destination, using the Direct-to Key or as the

last waypoint in a ﬂight plan.

2) Press the PROC Key and select the ‘VOR 22’

approach using the steps outlined in Section

6.1.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 287 288

Comments to this Manuals

No comments

Garmin GNS 530 User Manual Page 99

Comments to this Manuals

Related products and manuals for Air equipment Garmin GNS 530