Garmin G1000 Quest Kodiak User Manual download pdf (Page 86)

190-00590-00 Rev. C

Garmin G1000 Pilot’s Guide for the Quest K

odiak 1004-10

AUDIO PANEL AND CNS

AUTO-TUNING FROM THE MFD

Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT

page group by highlighting the frequency and pressing the ENT Key (Figures 4-9, 4-10, and 4-11).

Auto-tuning a COM frequency from the WPT and NRST Pages:

1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the

appropriate softkey.

2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-11).

3) Press the ENT Key to load the COM frequency into the standby ﬁeld of the selected COM radio.

4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.

Figure 4-9 Frequency Auto-Tuning from the MFD

Turn the

FMS

Knob to Scroll

Through a List

of Frequencies

Press the

ENT

Key to

Load a Highlighted

Frequency into

the COM Standby

Frequency Box

OR:

5) Press the MENU Key to display the PAGE MENU (Figure 4-10).

6) Turn the large FMS Knob to scroll through the OPTIONS Menu.

7) Press the ENT Key to place the cursor on the desired selection.

8) Scroll through the frequency selections with the FMS Knob or the ENT Key.

9) Press the ENT Key to load the COM frequency into the standby ﬁeld of the selected COM radio.

10) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.

Figure 4-10 Nearest Pages PAGE MENU

Nearest Airspaces MenuNearest Airports Menu Nearest Frequencies Menu

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 339 340

No comments

Garmin G1000 Quest Kodiak User Manual Page 86