Garmin G1000 Quest Kodiak User Manual download pdf (Page 37)

SYSTEM OVERVIEW

1-27190-00590-00 Rev. C

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100

AIRSPACE ALERTS

The Airspace Alerts Box allows the pilot to turn the controlled/special-use airspace message alerts on

or off. This does not affect the alerts listed on the Nearest Airspaces Page or the airspace boundaries

depicted on the MFD Navigation Map Page. It simply turns on/off the warning provided when the aircraft

is approaching or near an airspace.

Alerts for the following airspaces can be turned on/off in the Airspace Alerts Box:

• Class B/TMA

• Class C/TCA

• Class D

• Restricted

• MOA (Military)

• Other airspaces

An altitude buffer is also provided which “expands” the vertical range above or below an airspace. For

example, if the buffer is set at 500 feet, and the aircraft is more than 500 feet above/below an airspace, an

alert message will not be generated, but if the aircraft is less than 500 feet above/below an airspace and

projected to enter it, the pilot is notiﬁed with an alert message. The default setting for the altitude buffer

is 200 feet.

Changing the altitude buffer distance setting:

1) Use the FMS knob to select the System Setup Page.

2) Press the FMS Knob momentarily to activate the ﬂashing cursor.

3) Turn the large FMS Knob to highlight the altitude buffer ﬁeld in the Airspace Alerts Box.

4) Enter an altitude buffer value and press the ENT Key.

Turning an airspace alert on or off:

1) Use the FMS knob to select the System Setup Page.

2) Press the FMS Knob momentarily to activate the ﬂashing cursor.

3) Turn the large FMS Knob to highlight the desired ﬁeld in the Airspace Alerts Box.

4) Turn the small FMS Knob clockwise to turn the airspace alert ON or counterclockwise to turn the alert OFF.

ARRIVAL ALERTS

The Arrival Alert Box on the System Setup Page allows arrival alerts to be turned on/off and the alert

trigger distance set. An arrival alert can be set to notify the pilot with a message upon reaching a user-

speciﬁed distance from the ﬁnal destination (the direct-to waypoint or the last waypoint in a ﬂight plan).

Once the set distance (up to 99.9 units) has been reached, an “Arrival at [waypoint]” message is displayed

in the PFD Navigation Status Box.

Enabling/disabling an arrival alert:

1) Use the FMS knob to select the System Setup Page.

2) Press the FMS Knob momentarily to activate the ﬂashing cursor.

3) Turn the large FMS Knob to select the ON/OFF ﬁeld in the Arrival Alert Box.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 339 340

No comments

Garmin G1000 Quest Kodiak User Manual Page 37