Garmin G1000 Quest Kodiak User Manual download pdf (Page 106)

190-00590-00 Rev. C

Garmin G1000 Pilot’s Guide for the Quest K

odiak 1004-30

AUDIO PANEL AND CNS

FLIGHT ID REPORTING

NOTE: If the Flight ID is required but the system is not conﬁgured for it, contact a Garmin-authorized service

center for conﬁguration.

When the Flight ID must be entered before ﬂight operation, the identiﬁer is placed in the Timer/References

Window on the PFD. The Flight ID is not to exceed seven characters. No space is needed when entering

Flight ID. When a Flight ID contains a space, the system automatically removes it upon completion of Flight

ID entry.

Entering a Flight ID:

1) Press the TMR/REF Softkey to display the Timer/References Window.

2) Press the FMS Knob to activate the selection cursor, if not already activated.

3) Turn the large FMS Knob to scroll down to the Flight ID.

4) Turn the small FMS Knob to enter the desired Flight ID.

5) Press the ENT Key to complete Flight ID entry.

If an error is made during Flight ID entry, pressing the

CLR Key returns to the original Flight ID entry. While

entering a Flight ID, turning the FMS Knob counterclockwise moves the cursor back one space for each detent

of rotation. If an incorrect Flight ID is discovered after the unit begins operation, reenter the correct Flight ID

using the same procedure.

Figure 4-39 Timer/References Window, Entering Flight ID

Flight ID

PFD Entry

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 339 340

No comments

Garmin G1000 Quest Kodiak User Manual Page 106