Garmin Software Version 0563.32 User's Guide Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-13 Rev. B
30
Flight Planning
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
NOTE: The page mode must be set to ‘MANUAL’ to perform the following
steps.
5)
Turn the large FMS Knob to highlight the departure time (DEP TIME) field.
NOTE: The departure time on the Trip Planning Page is used for preflight
planning. Refer to the Utility Page for the actual flight departure time.
6)
Enter the departure time. Press the ENT Key when finished. Departure time may be
entered in local or UTC time, depending upon system settings.
7)
T
he flashing cursor moves to the ground speed (GS) field. Enter the ground speed.
Press the ENT Key when finished. Note that in ‘automatic’ page mode, ground
speed is provided by the system.
8)
The flashing cursor moves to the fuel flow field. Enter the fuel flow. Press the ENT
Key when finished. Note that in ‘AUTOMATIC’ page mode, fuel flow is provided by
the system.
9)
The flashing cursor moves to the fuel onboard field. Enter the fuel onboard. Press
the ENT Key when finished. Note that in AUTOMATIC’ page mode, fuel onboard is
provided by the fuel totalizer.
10)
The flashing cursor moves to the calibrated airspeed (CALIBRATED AS) field.
Enter the calibrated airspeed. Press the ENT Key when finished. Note that
in ‘AUTOMATIC’ page mode, calibrated airspeed is provided by the system.
11)
The flashing cursor moves to the altitude (IND ALTITUDE) field. Enter the altitude.
Press the ENT Key when finished. Note that in AUTOMATIC’ page mode, altitude is
provided by the system.
12)
The flashing cursor moves to the barometric setting (PRESSURE) field. Enter the desired
baro setting. Press the ENT Key when finished. Note that in AUTOMATIC’ page mode,
the baro setting is provided by the setting entered on the PFD.
13)
The flashing cursor moves to the air temperature (TOTAL AIR TEMP) field. Enter the
desired air temperature. Press the ENT Key when finished. Note that in ‘AUTOMATIC’
page mode, air temperature is provided by the system outside air temperature.
CREATE A USER WAYPOINT DEFINED BY LATITUDE & LONGITUDE
1)
Turn the large FMS Knob on the MFD to select the ‘WPT’ page group.
2)
Turn the small FMS Knob to select the User WPT Information Page.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 181 182

Comments to this Manuals

No comments