Garmin Software Version 0563.32 User's Guide Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-13 Rev. B 15
Nav/Com/XPDR/Audio Panel
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
NAV/COM/TRANSPONDER/AUDIO PANEL
ADF RADIO (OPTIONAL)
The G1000 does not support tuning of the ADF in Nav III aircraft. ADF tuning is
accomplished through the Bendix/King KR 87 ADF Radio. ADF volume must also be
adjusted through the KR 87.
DME TUNING (OPTIONAL)
1)
Press the DME Softkey.
2)
Turn the large FMS Knob to select the DME source field.
3)
Turn the small FMS Knob to select the desired Nav radio.
4)
Press the ENT Key to complete the selection.
ENTER A TRANSPONDER CODE
VFR Code Selection
1)
Press the
XPDR
Softkey to display the transponder Mode Selection softkeys.
2)
Press the
VFR
Softkey to enter the VFR code. Pressing the
VFR
Softkey
again restores the previous identification code.
NOTE: The pre-programmed VFR Code is set at the factory to 1200.
Enter Code Using Softkeys
1)
Press the
XPDR
Softkey to display the transponder Mode Selection softkeys.
2)
Press the
CODE
Softkey to display the transponder Code Selection softkeys,
which includes the digit softkeys.
3)
Press the appropriate digit softkeys to enter the code in the four-digit code
field of the Transponder Status Box. When the last digit is entered, the
transponder code becomes active.
When entering a code, press the
BKSP
Softkey as needed to back up and
change code digits.
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 181 182

Comments to this Manuals

No comments