Garmin Software Version 0563.32 User's Guide Page 122

  • Download
  • Add to my manuals
  • Print
  • Page
    / 182
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 121
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-13 Rev. B
104
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
ELECTRONIC CHECKLISTS
NOTE: The checklists presented here are for example only and may not reflect
checklists actually available for the Cessna NAV III Aircraft. This material is
not intended to replace the checklist information presented in the AFM or
the Pilot Safety and Warning Supplements document.
NOTE: Garmin is not responsible for the content of checklists. Cessna
NAV III Aircraft checklists are created, modified, and updated by the aircraft
manufacturer.
The optional checklist functions are displayed on two levels of softkeys that are
available on any MFD page.
The MFD is able to display optional electronic checklists which allow a pilot to
quickly find the proper procedure on the ground and during each phase of flight.
The G1000 accesses the checklists from an SD card inserted into the bezel slot. If
the SD card contains an invalid checklist file or no checklist, the Power-up Page
messages display ‘Checklist File: Invalid’ or ‘Checklist File: N/A’ (not available) and the
CHKLIST Softkey is not available.
Accessing and navigating checklists:
1)
From any page on the MFD, press the CHKLIST Softkey or turn the large
FMS Knob to select the Checklist Page.
2)
Turn the large FMS Knob to select the ‘GROUP’ field.
3)
Turn the small FMS Knob to select the desired procedure and press the ENT
Key.
4)
Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5)
Turn the FMS Knob to select the desired checklist and press the ENT Key.
The selected checklist item is indicated with white text surrounded by a white
box.
6)
Press the ENT Key or CHECK Softkey to check the selected checklist item.
The line item turns green and a checkmark is placed in the associated box.
The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the CLR Key or UNCHECK Softkey to remove a check mark from an
item.
Page view 121
1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 181 182

Comments to this Manuals

No comments