Garmin Software Version 0563.05 User's Guide Page 134

  • Download
  • Add to my manuals
  • Print
  • Page
    / 190
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 133
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
8-8
SECTION 8 – FLIGHT PLANNING
8.18 DELETE A FLIGHT PLAN
1)
From the Flight Plan Catalog Page, press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to highlight the flight plan
to be deleted.
3)
Press the
DELETE
Softkey.
4)
A ‘Delete flight plan #?’ confirmation window is
displayed. With ‘OK’ highlighted, press the
ENT
Key to delete the flight plan. To cancel, turn the
large
FMS
Knob to highlight ‘CANCELand press
the
ENT
Key.
8.19 GRAPHICAL FLIGHT PLAN CREATION
1)
Press the
FPL
Key to display the Active Flight Plan
Page.
2)
Press the
Joystick
to activate the map pointer. Use
the
Joystick
to move the pointer to the desired
point on the map to be inserted as a waypoint in
the flight plan.
3)
Press the
LD WPT
Softkey. The selected waypoint is
inserted at the end of the flight plan. The default
user waypoint naming is USR000, USR001, USR002
and so on.
4)
If the selected waypoint is to be placed elsewhere in
the flight plan, press the
FMS
Knob to activate the
cursor. Waypoints are inserted
ABOVE
the cursor.
5)
After placing the cursor at the desired point in the
list of waypoints, press the
LD WPT
Softkey.
6)
To change the user waypoint name, follow the
procedure for modifying a user waypoint.
8.20 TRIP PLANNING
1)
Turn the large
FMS
Knob to select the ‘AUX’ page
group.
2)
Turn the small
FMS
Knob to select the first
rectangular page icon.
3)
The current page mode is displayed at the top of the
page: AUTOMATIC’ or ‘MANUAL’. To change the
page mode, press the
AUTO
or
MANUAL
Softkey.
Figure 8-21 Trip Planning Page
Starting WPT Ending WPT
4)
For Direct-to planning, press the
WPTS
Softkey and
verify that the starting waypoint field indicates
‘P.POS’ (present position). If necessary, press the
MENU
Key and select ‘Set WPT to Present Position’
to display P.POS’. Press the
ENT
Key and the
flashing cursor moves to the ending waypoint field.
Turn the
FMS
Knobs to enter the identifier of the
ending waypoint and press the
ENT
Key to accept
the waypoint.
Or
:
Page view 133
1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 189 190

Comments to this Manuals

No comments