Garmin Software Version 0370.13 User's Guide download pdf (Page 15)

Garmin G1000 Cockpit Reference Guide for the DA42

1-3

SECTION 1

SYSTEM OVERVIEW

(1) NAV VOL/ID Knob – Controls the NAV audio level.

Press to toggle the Morse code identiﬁer ON and OFF.

Volume level is shown in the ﬁeld as a percentage.

(2) NAV Frequency Toggle Key – Toggles the standby

and active NAV frequencies.

(3) Dual NAV Knob – Tunes the MHz (large knob) and

kHz (small knob) standby frequencies for the NAV re-

ceiver. Press to toggle the tuning cursor (light blue box)

between the NAV1 and NAV2 ﬁelds.

(4) Heading Knob – Turn to manually select a heading

on the HSI. When pressed, it synchronizes the heading

bug with the compass lubber line.

(5) Joystick – Changes the map range when rotated. Ac-

tivates the map pointer when pressed.

(6) CRS/BARO Knob – The large knob sets the altim-

eter barometric pressure and the

small knob adjusts the

course. The course is only adjustable when the HSI is in

VOR1, VOR2, or OBS/SUSP mode. Pressing this knob

centers the CDI on the currently selected VOR.

(7) Dual COM Knob – Tunes the MHz (large knob) and

kHz (small knob) standby frequencies for the COM trans-

ceiver. Pressing this knob toggles the tuning cursor (light

blue box) between the COM1 and COM2 ﬁelds.

(8) COM Frequency Toggle Key – Toggles the standby

and active COM frequencies. Pressing and holding this

key for two seconds automatically tunes the emergency

frequency (121.5 MHz) in the active frequency ﬁeld.

(9) COM VOL/SQ Knob – Controls COM audio level.

Pressing this knob turns the COM automatic squelch ON

and OFF. Audio volume level is shown in the ﬁeld as a

percentage.

(10) Direct-to Key – Allows the user to enter a destina-

tion waypoint and establish a direct course to the selected

destination (speciﬁed by the identiﬁer, chosen from the

active route, or taken from the map cursor position).

(11) FPL Key – Displays the active Flight Plan Page for

creating and editing the active ﬂight plan, or for accessing

stored ﬂight plans.

(12) CLR Key (DFLT MAP) – Erases information, can-

cels an entry, or removes page menus. To display the

Navigation Map Page immediately, press and hold CLR

(MFD only).

(13) Dual FMS Knob – Used to select the page to be

viewed (only on the MFD). The large knob selects a page

group (MAP, WPT, AUX, NRST), while the small knob

selects a speciﬁc page within the page group. Pressing the

small knob turns the selection cursor ON and OFF.

(14) MENU Key – Displays a context-sensitive list of op-

tions. This list allows the user to access additional features,

or to make setting changes that relate to certain pages.

(15) PROC Key – Selects approaches, departures and ar-

rivals from the ﬂight plan. If a ﬂight plan is used, avail

able procedures for the departure and/or arrival airport

are automatically suggested. If a ﬂight plan is not used,

the desired airport and the desired procedure may be se-

lected. This key selects IFR departure procedures (DPs),

arrival procedures (STARs) and approaches (IAPs) from

the database and loads them into the active ﬂight plan.

(16) ENT Key – Accepts a menu selection or data entry.

This key is used to approve an operation or complete data

entry. It is also used to conﬁrm selections and informa-

tion entries.

(17) Dual ALT Knob – Sets the reference altitude in the

box located above the Altimeter. The large knob selects

the thousands, while the small knob selects the hun-

dreds.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 93 94

Comments to this Manuals

No comments

Garmin Software Version 0370.13 User's Guide Page 15

Comments to this Manuals

Related products and manuals for Navigators Garmin Software Version 0370.13