Garmin Pilatus PC_6 User's Guide download pdf (Page 129)

190-00870-00 Rev. B

Garmin G950 Pilot’s Guide for the Pilatus PC-6

117

AUDIO PANEL AND CNS

SYSTEM

OVERVIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO PANEL

& CNS

FLIGHT

MANAGEMENT

HAZARD

AVOIDANCE

AFCS

ADDITIONAL

FEATURES

APPENDICES INDEX

FLIGHT ID REPORTING

NOTE: If the Flight ID is required but the system is not conﬁgured for it, contact a Garmin-authorized service

center for conﬁguration.

When the Flight ID must be entered before ﬂight operation, the identiﬁer is placed in the Timer/References

Window on the PFD. The Flight ID is not to exceed seven characters. No space is needed when entering Flight

ID. When a Flight ID contains a space, the system automatically removes it upon completion of Flight ID entry.

If conﬁguration is set to “SAME AS TAIL” the aircraft tail number will always be displayed.

Entering a Flight ID:

1) Select the TMR/REF Softkey to display the Timer/References Window.

2) Press the FMS Knob to activate the selection cursor, if not already activated.

3) Turn the large FMS Knob to scroll down to the Flight ID.

4) Turn the small FMS Knob to enter the desired Flight ID.

5) Press the ENT Key to complete Flight ID entry. The word “updating” appears until the new entry is completed.

If an error is made during Flight ID entry, pressing the CLR Key returns to the original Flight ID entry. While

entering a Flight ID, turning the FMS Knob counterclockwise moves the cursor back one space for each detent

of rotation. If an incorrect Flight ID is discovered after the unit begins operation, reenter the correct Flight ID

using the same procedure.

Figure 4-39 Timer/References Window, Entering Flight ID

Flight ID

PFD Entry

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 403 404

No comments

Garmin Pilatus PC_6 User's Guide Page 129