Garmin Appliance Data User's Guide download pdf (Page 54)

42 190-00607-02 Rev C

Detailed Operation

ADS-B Trafﬁc

ID, aircraft type, position between target and

ownship, distance, speed, and altitude. Position

is noted in clock numerals as relative to direc-

tion of travel for each aircraft. For instance, a

position noted as 11/2 means that the trafﬁc

is at your aircraft (ownship) 11 o’clock position

and your aircraft (ownship) is at the target’s 2

o’clock position.

Trafﬁc Option Page 1

The ﬁrst option page of the Trafﬁc function lets

you select options for the choices of Transmit Status,

Broadcast (FID) Mode, Enter (ADS-B) Code, Set ADS-

B code to 1200, and Services. The last option selection

takes you to the next page of options.

ADS-B Trafﬁc Menu Items (Page 1)

Transmit Status

(ADS-B Broadcast Options)

Selecting Tx Alt allows ADS-B position reports to

be transmitted with altitude information. Tx Alt Off

removes altitude information from the ADS-B position

reports. Standby suspends ADS-B position reports,

but displays other aircraft data when available. These

modes are similar to “ALT,” “ON,” and “Standby” on a

standard transponder. The GMX 200 must be conﬁg-

ured as the UAT’s control panel to make this function

available.

ADS-B Broadcast Mode Control

For ADS-B equipped installs, this feature allows the

pilot to control the broadcast mode of their aircraft.

Broadcast options are controlled via the Trafﬁc

Function Menu and allow the pilot to toggle between

Broadcast FID / Broadcast VFR. The GMX 200 must

be conﬁgured as the UAT’s control panel to make this

function available.

Broadcast FID

Causes the currently set Flight ID and permanently

assigned ICAO address to be broadcast with the

aircraft’s current position. The Flight ID and the ICAO

address are shown on the lower right corner of the

Trafﬁc Function page. The Flight ID is pilot-settable

via the menu option Enter FID in alphanumeric char-

acters. The ICAO address is a value set during system

install by the installer.

Broadcast VFR

Causes a ﬁxed Flight ID of “VFR” and a randomly

generated temporary address to be broadcast with

the aircraft’s current position. This mode is similar to

squawking “VFR 1200” on a standard transponder.

Enter Code (ADS-B Air Trafﬁc Source)

This is where you enter the ATC-assigned ADS-B

code. This code entered into the GMX 200 does NOT

control the code on Mode A, C, or S transponders. It

only sends the selected code to the GDL 90 UAT for

inclusion into the position report. The GMX 200 must

be conﬁgured as the UAT’s control panel and Code

Edit enabled to make this function available.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 147 148

Comments to this Manuals

No comments

Garmin Appliance Data User's Guide Page 54

Comments to this Manuals

Related products and manuals for Navigators Garmin Appliance Data