Garmin GPSMAP 495 User Manual download pdf (Page 109)

GPSMAP 495 Owner’s Manual 101

Main Menu > Alarms Tab

Airspace Alarms Sub Tab (Aviation Mode Only)

Class B, CTA; Class C, TMA; Towers, Cntrl Zones; Restricted,

ADIZ; MOAs; Mode C Veils; Other SUAs—enables and disables

the alarms. Select On to enable or Off to disable.

Altitude Buffer—sets the buffer for the altitude alarm. Highlight

the Altitude Buffer ﬁeld, and press ENTER to select a different

value. Use the ROCKER to select the digits.

Airspace Alarms Tab

Navigation (Nav) Alarms Sub Tab

Next Turn—sets an alarm to indicate next turn in route. Select Off

for no Next Turn alarm. Select Dist to enter a speciﬁc distance. For

example, if you enter 1 nm, the Next Turn alarm sounds one nautical

mile before you reach the next turn. Select Time to enter a speciﬁc

time before the turn for the alarm to go off. For example, if you

enter 00:02:00, the Next Turn alarm sounds two minutes before you

reach the next turn. Select Auto for the unit to provide a Next Turn

alarm at its discretion.

Arrival—sets an alarm to sound when you are a speciﬁed distance

or time away from a destination waypoint. Select Off for no Arrival

alarm. Select Dist to enter a speciﬁc distance. Select Time to enter

a speciﬁc time before the destination for the alarm to go off. Select

Auto for the unit to provide an Arrival alarm at its discretion.

Off Course—sets an alarm to sound when off your course. Select

On, then enter a distance.

Anchor Drag

—sets an alarm to sound when you have exceeded a

speciﬁed drift distance. Select On, and then enter a distance.

Custom POI—sets an alarm to sound when you have entered the

proximity of a custom POI.

CAUTION: Garmin is not responsible for the consequences

of using a custom POI database or the accuracy of the safety

camera or other custom POI database.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 178 179

No comments

Garmin GPSMAP 495 User Manual Page 109