Garmin GPSMAP 495 User Manual Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 179
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
48 GPSMAP 495 Owner’s Manual
Aviation
Aviation Mode Pages > Aircraft Information
To rename or delete a saved aircraft profile:
1. From the Aircraft Profile tab, use the ROCKER to highlight the
Current Aircraft and to select the profile you want to rename.
2. Use the ROCKER to select the on-screen Rename or Delete
button, and press ENTER. If Rename is selected, use the
ROCKER and ENTER keys to enter a new tail number.
Calculating the Weight & Balance
Weight & Balance may be used during your pre-flight preparations
to verify the weight and balance conditions for your aircraft. By
entering the weight and arm values on this page, the GPSMAP 495
can calculate the total weight, moment, and center of gravity (CG) to
ensure a safe flight.
Before entering the various figures, you need to determine the
empty weight of the airplane and the arm (or “station”) for each
weight entered. These figures should be determined using the pilot’s
operating handbook for your airplane, which also notes the weight
limitations and fore/aft CG limits. Compare those figures to the
values calculated by the GPSMAP 495.
To perform weight and balance calculations:
1. Press MENU twice to open the Main Menu.
2. Highlight Aircraft from the vertical list of tabs.
3. Press the ROCKER right to highlight Weight & Balance.
Weight & Balance Tab
4. Highlight the WEIGHT field, and press ENTER.
5. Use the
ROCKER to enter the weight figure. Press ENTER.
6. Change the weight units. Highlight
lbs, and press ENTER.
OR
Select Kgs, and press ENTER.
7. Highlight the corresponding
ARM field, and press ENTER.
8. Use the
ROCKER to enter the arm figure. Press ENTER.
9. Repeat steps 4 through 8 until all figures are entered. The
calculated moment, weight, and CG figures appear at the bottom
of the page. Keep in mind that the “Aircraft” (empty weight/arm)
figures must be entered as a reference to calculate a valid
moment, weight, and CG.
10. To empty the aircraft, press MENU, select Empty Aircraft, and
press ENTER.
NOTE: This information is only for flight planning purposes.
Consult your aircraft’s pilot handbook for the official weight and
balance data.
Page view 55
1 ... 55 56 57 ... 179

Comments to this Manuals

No comments