Garmin Non_Airframe Specific User's Guide download pdf (Page 29)

G600 Cockpit Reference Guide

190-00601-03 Rev F

PRIMARY FLIGHT DISPLAY (PFD)

PRIMARY FLIGHT DISPLAY

Heading

The GDU 620 heading bug may be used in conjunction with the “Heading”

mode of supported autopilots. When the autopilot is in “heading” mode and the

heading bug is adjusted in the normal manner, and the autopilot will turn to and

maintain the selected heading. Refer to the Airplane Flight Manual and autopilot

system documentation for instructions on how to use the autopilot heading mode

Selected Heading Box on HSI

Altitude Capture (Optional Upgrade)

Adjust the altitude bug in the normal manner when using the altitude capture

interface. Some autopilot installations support arming and disarming of the

selected altitude using the

ALT

key on the PFD. The PFD knob window will

indicate when this function is available. The selected altitude may be alternately

armed or disarmed by pressing and holding the ALT key on the PFD bezel.

Arm/Disarm Altitude Bug

Autopilot Navigation

The GDU 620 acts as a switching source between the installed navigation

sources (e.g. GPS/VLOC 1-2). The navigation source that is displayed on the HSI

is sent to the autopilot. Refer to the Airplane Flight Manual and autopilot system

documentation for instructions on how to use the autopilot navigation functions.

1) Set your navigation source and HSI to the desired course.

2) Engage your autopilot in navigation mode.

3) Control your autopilot navigation through the navigation source and the HSI.

1 ... 28 29 30 ... 90

No comments

Garmin Non_Airframe Specific User's Guide Page 29