Garmin GPSMAP 4212 User Manual Page 39
- Page / 84
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
GPSMAP 4000 Series Owner’s Manual 35
Conguring the Device
ConfiGUrinG
the deViCe
Conguring the Device
Use the Congure screen to congure device settings.
Conguring System Settings
From the Home screen, select Congure > System.
Simulator—turn Simulator mode On or Off. Select Setup to set Simulator options. (If you set the
chartplotter to a Store Demonstration mode during the initial device setup, this setting will be named
Demo.)
Auto Power Up (GPSMAP 4210 only)—turn Auto Power Up On or Off. When On is selected, the
chartplotter automatically will turn on whenever power is applied, unless the chartplotter is turned
off with the Power key before power is lost.
Beeper/Display—set Beeper options, Backlight, and Color mode.
Beeper—select Beeper to set when the chartplotter makes audible sounds. The settings are Off,
Alarms Only
(default), and Key and Alarm.
Backlight—select Backlight to adjust the intensity of the backlight. Select Auto to allow the
chartplotter to automatically adjust the backlight based on ambient light.
Color Mode—select Color Mode to select Day Colors or Night Colors, or select Auto to allow
the chartplotter to adjust the colors.
Screenshot Capture—turn the screenshot capture feature on or off (page 68).
GPS—view GPS satellites.
System Information—view system information, restore factory settings, view the status of
networked devices (page 42), and display the event log. The event log displays a list of system
events. Select the event to view additional information. The Save to Card option is provided as a
troubleshooting tool; a Garmin Product Support representative may ask you to use this to retrieve
data about the marine network.
Radar Diagnostics (if radar is connected)—a troubleshooting tool used by installers.
Changing the System Language
1. From the Home screen, select Congure > Preferences > Language.
2. Select the language.
Conguring Navigation Preferences
From the Home screen, select Congure > Preferences > Navigation.
Route Labels—for saved routes, this determines whether route turns are indicated by number (Turn
1, Turn 2, and so on) or by waypoint name, or whether the description of turns is hidden.
Turn Transition—set how much time or how far before a turn in a route that you transition to the
next leg. Raising this value can help improve the accuracy of the autopilot when navigating a route
or automatic-guidance line with many frequent turns or at higher speeds. For straighter routes or
slower speeds, lowering this value can improve autopilot accuracy.
Speed Sources—specify the sensor used for Wind numbers and Fuel Economy. Select Wind or Fuel
Economy to toggle between Water (from a water-speed sensor) and GPS (from the calculated GPS
speed).
•
•
•
•
- 4000 Series 1
- Introduction 3
- Table of Contents 4
- Getting Started 5
- Turning on the Chartplotter 6
- Turning Off the Chartplotter 6
- Adjusting the Backlight 7
- Adjusting the Color Mode 7
- GettinG 8
- Viewing System Information 8
- Using the Simulator Mode 8
- Understanding the Home Screen 9
- Using Charts 10
- Navigation Chart Settings 11
- Understanding Chart Data 11
- Panning the Navigation Chart 12
- Data Bars 14
- Changing the Chart Appearance 15
- Using Perspective 3D 16
- Using Tracks 17
- Using Radar Overlay 17
- Using BlueChart g2 Vision 19
- Using Mariner’s Eye 3D 20
- Using Fish Eye 3D 21
- Using Fishing Charts 22
- Viewing Aerial Photos 23
- Detailed Road and POI Data 24
- Using Automatic Guidance 24
- Using Combinations 25
- Where To? 27
- Creating and Using Waypoints 29
- Creating and Using Routes 31
- Viewing Information 33
- Viewing Celestial Information 34
- Viewing User Data 34
- Viewing the DSC List 36
- Viewing Engine Gauges 37
- Viewing Fuel Gauges 37
- Viewing Video 38
- Conguring the Device 39
- Conguring Units of Measure 40
- ConfiGUrinG 41
- Setting Alarms 42
- Conguring My Boat 43
- Conguring Other Vessels 44
- Conguring XM Audio 45
- Using the Marine Network 46
- Using Radar 48
- Using Cruising Mode 49
- Using Sentry Mode 49
- Radar Targeting 50
- Adjusting the VRM and EBL 52
- Advanced Radar Conguration 53
- Using Sonar 54
- Understanding the Temp Log 55
- Setting Up Sonar 56
- Advanced Sonar Settings 57
- Adding a DSC Contact 58
- Receiving Distress Calls 59
- Position Tracking 60
- Calling an AIS Target 61
- SinG Xm 62
- Using XM 63
- Viewing Sea Conditions 65
- Viewing Fish Forecasting 67
- Using XM Audio 69
- Appendix 70
- NMEA 0183 and NMEA 2000 71
- Capturing Screenshots 72
- Messages and Alarms 73
- Product Registration 77
- Contact Garmin 77
- Declaration of Conformity 77
- Weather Data Warranty 77
- Software License Agreement 78
Related products and manuals for Navigators Garmin GPSMAP 4212
Navigators Garmin SA01535Wi_D Manual
(314 pages)
(314 pages)
Navigators Garmin Appliance Data User Manual
(26 pages)
(26 pages)
(6 pages)
Navigators Garmin SA01535Wi_D Instruction Manual
(308 pages)
(308 pages)
Navigators Garmin 20 User Manual
(20 pages)
(20 pages)
Navigators Garmin GPS 38 User Manual
(68 pages)
(68 pages)
Navigators Garmin quatix Owner's Manual
(22 pages)
(22 pages)
Navigators Garmin AW119Kx User's Guide
(126 pages)
(126 pages)
© 2020, manymanuals.com. All rights reserved. | 0.094 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals