Garmin GPS Kit User Manual download pdf (Page 11)

Here We Go. . .

The Getting Started Section introduces you to the basic op-

eration of the eTrex. The Reference Section shows you how to use

all of eTrex’s remaining features.

The First Step

The eTrex operates on information gathered from

satellites. To gather this information, take your eTrex

outside and find a large, open area that has a clear view of

the sky (a nearby park would work fine). Press and hold

the POWER Button to turn the unit on. You’ll see the

Welcome Page for a few seconds while the eTrex performs

a self-test, followed by the Satellite Page.

The eTrex needs to receive at least three strong satellite

signals to find your location. The Satellite Page shows you

graphically eTrex tracking satellites, the strength of the

satellite signals, and the satellite tracking status.

The Satellite Page

When you see the “READY TO NAVIGATE” message

on the Satellite Page, eTrex has found your location and

you are ready to go!

Backlighting and Contrast

If the lighting conditions make it hard for you to see the

screen, you can adjust the contrast or turn on the backlight.

Press and release the POWER Button from any screen to

turn on the backlight. The backlight is timed to stay on for

30 seconds to save battery power. To adjust the screen con-

trast, press the PAGE Button until you see the Satellite Page.

Press the UP button to make the screen darker, press the

DOWN Button to make the screen lighter.

The Welcome Page

When you use the eTrex for the first

time, it will take up to five minutes to find your

location. After the first use, eTrex only needs

about 15 to 45 seconds to find your location.

Getting

Started

1 ... 10 11 12 ... 54

No comments

Garmin GPS Kit User Manual Page 11