Garmin 670 User Manual download pdf (Page 63)

nüvi 610/660/670 Owner’s Manual 57

aPPendix

Mounting the nüvi on Your Dashboard

Use the enclosed mounting disk to mount your nüvi to the dashboard.

Important:

The permanent mounting adhesive is extremely difcult to remove after

it is installed.

To install the mounting disk:

1. Clean and dry the dashboard where you want

to place the disk.

2. Remove the backing from the permanent

mounting adhesive on the bottom of the

disk, and place the disk on the

dashboard.

3. Place the suction cup mount on top of the disk.

4. Flip the suction lever down to secure the suction cup mount to the disk.

Removing the nüvi and the Mount

1. To remove the nüvi, press up on the tab on the bottom of the cradle.

2. Lift the nüvi off of the mount.

3. To remove the suction cup from the windshield, ip the lever toward you.

4. Pull the tab on the suction cup toward you.

Removing the Cradle from the Mount

To remove the cradle from the mount arm, turn the cradle to one side. The cradle

snaps off of the ball socket. To replace the cradle, snap the cradle on the ball socket.

Disk

Suction

cup mount

Suction

lever

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 75 76

No comments

Garmin 670 User Manual Page 63