Garmin Edge 305 with Cadence Sensor Owner's Manual download pdf (Page 17)

Edge

™

205/305 Owner’s Manual 17

GETTING STARTED

2. Attach the pedal magnet

to the crank arm using the

adhesive mount and a cable

tie. Make sure the pedal

magnet is within 5 mm of the

GSC10 and the indication line

on the pedal magnet lines up

with the indication line on the

GSC10.

3. Attach the spoke magnet by

unscrewing the magnet from

the plastic piece. Then place

the spoke in the groove of

the plastic piece and tighten

slightly. The magnet can face

away from GSC10 if there is

not enough room between

sensor arm and spoke. Make

sure the magnet is aligned

with the sensor arm indication

line.

4. Unscrew and move the

sensor arm to within 5 mm of

the spoke magnet. You can

also tilt the GSC10 closer to

either magnet for improved

alignment.

cable tie

Pedal magnet on crank arm

indication

line

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 93 94

No comments

Garmin Edge 305 with Cadence Sensor Owner's Manual Page 17