Garmin GNS 430 User Manual download pdf (Page 151)

143

3. The flashing cursor highlights the transfer data option (TRANSFER) field. Rotate the small

right knob (

) to display a window of available data options:

• Active Flight Plan—transfer the active flight plan to/from a second 400-

Series Garmin unit (GNS 430/GNC 420/GPS 400) in a dual unit installa-

tion. This option is the default when selecting “Crossfill” from the flight

planning page.

• Flight Plan—transfer any stored flight plan to/from a second 400-Series

unit, by selecting the flight plan by number. This option is the default

when selecting “Crossfill” from the flight plan catalog. See page 58.

• User Waypoints (all)—transfer all stored user waypoints to/from a sec-

ond 400-Series unit.

• User Waypoint—transfer the specified user waypoint to a second 400-

Series unit.

4. Continue rotating the small right knob (

) to select the desired data option. Press

when finished.

5. For a stored flight plan (“Flight Plan” data option), the flight plan number field is highlighted.

Rotate the small right knob (

) to select the desired flight plan and press

6. For a specified user waypoint (“User Waypoint” data option), the waypoint identifier field is

highlighted. Use the small (

) and large (

) right knobs to enter the identifier of the

desired user waypoint. Press

when finished.

7. The flashing cursor moves to the “CROSS-SIDE” field. Rotate the small right knob (

) to

select “To” or “From” and press

8. The flashing cursor moves to the “Initiate Transfer?” confirmation field. Press

to transfer

the selected data.

AUX PAGES

Flight Planning

190-00140-00.indd 143 5/7/2003, 5:18:18 PM

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 203 204

No comments

Garmin GNS 430 User Manual Page 151