Garmin GPSMAP 162 User Manual download pdf (Page 55)

Reference

Going to a Destination

To turn proximity alarms on or off:

1. Use the ARROW KEYPAD to highlight the ﬁ eld below “Proximity Alarm” and press

ENTER/MARK.

2. Select the desired ‘ON’ or ‘OFF’ setting and press ENTER/MARK.

To clear one or all proximity waypoint(s) from the list:

1. Use the ARROW KEYPAD to highlight the proximity waypoint to clear and then press the MENU

key.

2. To clear a single alarm, highlight the ‘Clear Alarm’ ﬁ eld and press ENTER/MARK.

3. To clear all proximity waypoints, select the ‘Clear All’ option and press ENTER/MARK.

4. Use the ARROW KEYPAD to highlight the ‘OK’ prompt and press ENTER/MARK to conﬁ rm.

Going to a Destination

Using the NAV/MOB key, the GPSMAP 162 provides four ways to navigate to a destination: Go To

Waypoint, Follow Track (TracBack), MOB (Man OverBoard), and Follow Route navigation. Once you

are actively navigating, you will see a straight line that always runs from the point where you started the

GOTO, to the destination. The easiest method for selecting a destination is the ‘Go To’ function, which

lets you select a destination waypoint and quickly sets a direct course from your present position.

If you have a waypoint highlighted on a list or the map, ‘Go To <waypoint name>’ will appear in

addition to ‘Go To Waypoint’. The ‘Go To’ function can be accessed from a list of waypoints or

graphically from the map display.

A dashed circle will appear showing

the alert boundary for the proximity

waypoints.

Proximity Circle Proximity Waypoint

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 98 99

No comments

Garmin GPSMAP 162 User Manual Page 55