Garmin GPSMAP 76S User Manual download pdf (Page 42)

Reference

be edited as any other User Waypoint. When placing a “New Waypoint” in a

route, you will have to press ENTER to create the waypoint, ENTER to save

the waypoint and ENTER a ﬁnal time to insert it into the route.

If you place the Map Pointer on a Map Feature (road, park, intersection, etc.)

the GPSMAP 76S will store that location only to the route using the feature

name as a reference. These points are not stored in the User Waypoint List. If

you would like to save a Map Feature Point as a User Waypoint, highlight the

point in the route, press ENTER, this will display an Information Page. With

the Information Page displayed, press MENU and select ‘Save as Waypoint’.

Insert Waypoint —

This will display the Points Menu (see page 40 for infor-

mation on the Points Menu). As a note, if you highlight the dashed line in the

waypoint ﬁeld on the Route Page and press ENTER it is the same as making

this selection. Use the Points Menu to display an Information Page, then

highlight the ‘OK’ Button and press ENTER.

Using a combination of the Map Page and Route Page —

You can create

a route using a combination of the methods described above. Starting with

a blank Route Page, either enter a waypoint manually or press the MENU

Key and select ‘Use Map’. You can select ‘Use Map’ at any time while creating

a route. After you have ﬁnished using the map, press QUIT to display the

Route Page where you can continue entering waypoints manually.

Naming the Route —

the GPSMAP 76S will automatically name the route

using the ﬁrst and last waypoint names as a reference. To change the Route

Name, place the highlight over the Name ﬁeld then press ENTER. When you

have ﬁnished, press ENTER to save the new name.

Editing a Route

To edit a route the unit must be on the Route Page. When editing a route you

Main Menu — Routes

Createing a Route on the Map

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

No comments

Garmin GPSMAP 76S User Manual Page 42