GPSMAP® 400/500 seriesowner’s manual
4 GPSMAP 400/500 Series Owner’s ManualGetting StartedTo switch between Day and Night mode:1� Press and release the Power key�2� Select Color Mode
GPSMAP 400/500 Series Owner’s Manual 5Getting Started —Press to access additional settings and conguration options. Press to return to the previ
6 GPSMAP 400/500 Series Owner’s ManualGetting Started: If you use an SD card to transfer waypoints from MapSource® or HomePort™, update to the mo
GPSMAP 400/500 Series Owner’s Manual 7Using Charts Using ChartsYour chartplotter has a worldwide basemap or BlueChart g2 cartography for either the U
8 GPSMAP 400/500 Series Owner’s ManualUsing ChartsLightBeaconExposed wreckYour boatMarina servicesExposed rockTide stationZoom scaleNavigation Chart
GPSMAP 400/500 Series Owner’s Manual 9Using Charts • —turn the GPS Speed, GPS Heading, Depth, and GPS Position data bar on or off. Select
10 GPSMAP 400/500 Series Owner’s ManualUsing ChartsOther features common to most charts include depth contour lines (with deep water represented in w
GPSMAP 400/500 Series Owner’s Manual 11Using Charts Accessing Additional Object InformationUse the map pointer ( ) to view information about on-scree
12 GPSMAP 400/500 Series Owner’s ManualUsing Charts—displays a compass rose around your boat, indicating compass direction. True wind direction
GPSMAP 400/500 Series Owner’s Manual 13Using Charts —draws an extension line from the bow of the boat in the direction of travel.• —t
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or s
14 GPSMAP 400/500 Series Owner’s ManualUsing ChartsUsing the Split Navigation ChartUse the Split Navigation chart to view two different zoom levels o
GPSMAP 400/500 Series Owner’s Manual 15Using Charts • —view, sort, or lter existing waypoints, or create new ones.• —create a
16 GPSMAP 400/500 Series Owner’s ManualUsing ChartsTo view details about navaids such as beacons, lights, and obstructions:1� Use the Rocker to poin
GPSMAP 400/500 Series Owner’s Manual 17Using Charts —adjusts the width of the course line drawn when navigating. This setting also affects
18 GPSMAP 400/500 Series Owner’s ManualUsing ChartsThe Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision SD card, a
GPSMAP 400/500 Series Owner’s Manual 19Using Charts : When enabled, the high-resolution satellite images are only present at lower zoom levels. I
20 GPSMAP 400/500 Series Owner’s ManualUsing ChartsTo access aerial photos from the Navigation chart: Use the Rocker to highlight a camera icon with
GPSMAP 400/500 Series Owner’s Manual 21Using Charts Current direction indicators appear as arrows on the chart. The direction of each arrow indicates
22 GPSMAP 400/500 Series Owner’s ManualUsing ChartsUsing the Chart/Sonar Screen: The Chart/Sonar screen, like the Sonar screen, is only available
GPSMAP 400/500 Series Owner’s Manual 23Where To?Where To?Use the option on the Home screen to search for, and navigate to, waypoints, route
GPSMAP 400/500 Series Owner’s Manual iIntroductionIntroductionThis manual includes information for the following products:GPSMAP® 421/421s GPSMAP 45
24 GPSMAP 400/500 Series Owner’s ManualWhere To?3� Select a destination�: Press the right or left arrow to view additional information or to dis
GPSMAP 400/500 Series Owner’s Manual 25Where To?Creating and Using WaypointsYou can store up to 3,000 waypoints with a user-dened name, symbol, dept
26 GPSMAP 400/500 Series Owner’s ManualWhere To?To view waypoint information on the Navigation chart:1� From the Navigation chart, use the map point
GPSMAP 400/500 Series Owner’s Manual 27Where To?4� Press SELECT� Repeat this step to add additional turns�5� Press MENU to cancel, to undo the last
28 GPSMAP 400/500 Series Owner’s ManualWhere To?To delete a route:1� From the Home screen, select Information > User Data > Routes�2� Select
GPSMAP 400/500 Series Owner’s Manual 29Where To?To clear the active track: From the Navigation or Perspective 3D chart, select MENU > Waypoints &
30 GPSMAP 400/500 Series Owner’s ManualWhere To?Using BlueChart g2 VisionNOTICEBlueChart g2 Vision data cards are not waterproof. When you are not us
GPSMAP 400/500 Series Owner’s Manual 31Viewing Information Viewing InformationUse the Information screen to access information about dashboard gauges
32 GPSMAP 400/500 Series Owner’s ManualViewing Information3� Select the number of elds to show (3, 4, 5, or 6)�4� Select information to show in ea
GPSMAP 400/500 Series Owner’s Manual 33Viewing Information From the Home screen, select Information > Dashboard > Engine�Cycling Through Engi
ii GPSMAP 400/500 Series Owner’s ManualIntroductionTable of ContentsIntroduction ��������������������������������������������������������������������
34 GPSMAP 400/500 Series Owner’s ManualViewing InformationSelecting the Number of Engines Shown in GaugesThe engine gauges can show information for u
GPSMAP 400/500 Series Owner’s Manual 35Viewing Information From the Home screen, select Information > Dashboard > Engine > MENU > Gauge
36 GPSMAP 400/500 Series Owner’s ManualViewing InformationViewing and Customizing Wind GaugesFrom the Home screen, select >
GPSMAP 400/500 Series Owner’s Manual 37Viewing Information Conguring the Heading SourceYou can specify the source of the heading displayed on the wi
38 GPSMAP 400/500 Series Owner’s ManualViewing InformationViewing Current InformationUse the Current Prediction screen to view information for curren
GPSMAP 400/500 Series Owner’s Manual 39Viewing Information Viewing Celestial Information for a Different DateYou can select a date and time for which
40 GPSMAP 400/500 Series Owner’s ManualViewing InformationTo transfer data (waypoints, routes, tracks) to an SD card:1� Insert an SD card into the S
GPSMAP 400/500 Series Owner’s Manual 41Viewing Information 3� Complete one of the following:• Select the le name from the list�• Select Add New F
42 GPSMAP 400/500 Series Owner’s ManualViewing InformationAbout AISAIS alerts you to area trafc. When connected to an external AIS device, the chart
GPSMAP 400/500 Series Owner’s Manual 43Viewing Information Target is activated� The target appears larger on the chart� A green line attached to the
GPSMAP 400/500 Series Owner’s Manual iiiIntroductionConguring the Chartplotter ����������������������������������������������48Viewing System Inform
44 GPSMAP 400/500 Series Owner’s ManualViewing Informationthe projected course line.When course over ground, heading, and rate-of-turn information ar
GPSMAP 400/500 Series Owner’s Manual 45Viewing Information Showing AIS Vessels on a Chart or on a 3D Chart ViewAIS requires the use of an external AI
46 GPSMAP 400/500 Series Owner’s ManualViewing Information2� Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D�3� Use the
GPSMAP 400/500 Series Owner’s Manual 47Viewing Information The AIS target list shows information about all of the boats your unit is monitoring. The
48 GPSMAP 400/500 Series Owner’s ManualConguring the ChartplotterConguring the ChartplotterUse the Congure screen to congure unit settings.Viewin
GPSMAP 400/500 Series Owner’s Manual 49Conguring the ChartplotterConguring Units of Measure To change units of measure from the Home screen, selec
50 GPSMAP 400/500 Series Owner’s ManualConguring the ChartplotterConguring Navigation Preferences To change navigation preferences, from the Home
GPSMAP 400/500 Series Owner’s Manual 51Conguring the Chartplotter• If the placement of the Auto Guidance line is satisfactory, select MENU > Nav
52 GPSMAP 400/500 Series Owner’s ManualConguring the Chartplotter (if supported)—congures the input/output format for serial port 2 to
GPSMAP 400/500 Series Owner’s Manual 53Conguring the Chartplotter2� Select the type of tank you want to label�3� Select Choose Names�4� Select a
iv GPSMAP 400/500 Series Owner’s ManualIntroduction See the Important Safety and Product Information guide in the product box for product warnings a
54 GPSMAP 400/500 Series Owner’s ManualConguring the Chartplotter—set an alarm to sound when the battery reaches a specied low voltage.
GPSMAP 400/500 Series Owner’s Manual 55Conguring the ChartplotterConguring My Boat To congure settings for your boat, from the Home screen, selec
56 GPSMAP 400/500 Series Owner’s ManualConguring the Chartplotter—enter the total fuel capacity of your boat.Conguring Other Vessels
GPSMAP 400/500 Series Owner’s Manual 57Using SonarUsing SonarWhen connected to a transducer, the following chartplotters can be used as shnders: GP
58 GPSMAP 400/500 Series Owner’s ManualUsing SonarUnderstanding the Split Frequency ScreenUse the Split Frequency screen (dual-frequency transducer o
GPSMAP 400/500 Series Owner’s Manual 59Using SonarUnderstanding the Depth Log ScreenThe Depth Log screen keeps a graphic log of temperature readings
60 GPSMAP 400/500 Series Owner’s ManualUsing SonarSetting Up SonarUse the Sonar Setup screen to dene and adjust settings universal to all sonar scre
GPSMAP 400/500 Series Owner’s Manual 61Using Sonar ◦ —many strong returns are highlighted in white. ◦ —the least-sensitive setting. Only the
62 GPSMAP 400/500 Series Owner’s ManualDigital Selective CallingDigital Selective Calling (DSC)Using the Chartplotter with a VHF RadioThe following t
GPSMAP 400/500 Series Owner’s Manual 63Digital Selective CallingTo turn DSC on or off:1� Select Congure > Other Vessels�2� Select DSC to toggle
GPSMAP 400/500 Series Owner’s Manual 1Getting Started Getting StartedUnit OverviewPOWER/ BACKLIGHTMENUROCKERSELECTHOMERANGE (-/+)MARKSD card slotGPSM
64 GPSMAP 400/500 Series Owner’s ManualDigital Selective CallingMan-Overboard Distress Calls Initiated from a VHF RadioWhen your Garmin chartplotter
GPSMAP 400/500 Series Owner’s Manual 65Digital Selective Calling• Select Navigate To to Go To or Route To the location sent with the position report
66 GPSMAP 400/500 Series Owner’s ManualDigital Selective CallingTo make an individual routine call:1� While viewing a chart, press MENU > Other V
GPSMAP 400/500 Series Owner’s Manual 67Appendix AppendixSpecicationsPhysical Specications W × H × D: 5.7 in. × 5.0 in. × 3.0 in.
68 GPSMAP 400/500 Series Owner’s ManualAppendix (Average acquisition times for a stationary receiver with a clear view of the sky)
GPSMAP 400/500 Series Owner’s Manual 69Appendix Alarms and MessagesThe unit uses an on-screen message system to alert you to unit operating character
70 GPSMAP 400/500 Series Owner’s ManualAppendix—shows the MMSI or name associated with an MMSI.—intern
GPSMAP 400/500 Series Owner’s Manual 71Appendix —no additional route waypoints can be saved.—the Shallow
72 GPSMAP 400/500 Series Owner’s ManualAppendix—you entered a waypoint name that already exists in memory. Modify the waypoint
GPSMAP 400/500 Series Owner’s Manual 73Appendix Honda Engine ECO SymbolThe symbol appears when boats with NMEA 2000-compatible Honda engines are ru
2 GPSMAP 400/500 Series Owner’s ManualGetting StartedTurning the Unit On or OffTo turn on the unit, press and release the key. When the Warni
Index74 GPSMAP 400/500 Series Owner’s ManualIndexAA-scope 60Active Tracks 15aerial photos 19AIS 41, 42, 56, 66targeting symbols 42threats 43AIS
IndexGPSMAP 400/500 Series Owner’s Manual 75Fishing 9shing chart 17Fish Symbols 17, 60frequency 61Fuel Capacity 56fuel gauge 35full screen, so
Index76 GPSMAP 400/500 Series Owner’s Manualroute to 23Ssafe-zone settings 56Safe Depth 16, 50Safe Height 50Safety Shading 13sailing data bar 9
IndexGPSMAP 400/500 Series Owner’s Manual 774x 61manual 61split 61
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www�garmin�com�©
GPSMAP 400/500 Series Owner’s Manual 3Getting Started —set the time zone you want displayed for time readings. If is selected for the T
Comments to this Manuals