Garmin Software Version 0857.09 Instruction Manual download pdf (Page 9)

G1000 System Maintenance Manual - Hawker Beechcraft G58 Page 1-1

190-01180-02 Revision 3

1 INTRODUCTION

1.1 CONTENT, SCOPE, PURPOSE

This document provides Instructions for Continued Airworthiness (ICA) for the Garmin G1000

integrated avionics as installed in the Hawker Beechcraft G58 as modified under STC

SA01584WI-D. This document satisfies the requirements for continued airworthiness as

defined by 14 CFR Part 23.1529 and Appendix G. Information in this document is required to

maintain the continued airworthiness of the G1000. This document is intended to be used in

conjunction with the existing Hawker Beechcraft Baron 55 and 58 Maintenance Manual and the

Hawker Beechcraft Baron (Model G58) Maintenance Manual Supplement listed in Table

1.1.

1.1.1 APPLICABILITY

This document applies to all G58 aircraft that have been modified in accordance with STC

SA01584WI-D. The data defining this modification is contained in the Master Drawing List 005-

00606-01.

Modification of an aircraft by this Supplemental Type Certificate (STC) obligates the aircraft

operator to include the maintenance information provided by this document in the operator’s

Aircraft Maintenance Manual and the operator’s Aircraft Scheduled Maintenance Program.

1.2 ORGANIZATION

The following outline briefly describes the organization of this manual:

Section 2: System Description

Provides a complete description of the type design change associated with updating the G1000

system in the Hawker Beechcraft G58 .

Section 3: G1000 Control & Operation

Presents basic control and operation information specifically tailored to maintenance practices.

Basic G1000 Configuration Mode operation is also described.

Section 4: Instructions for Continued Airworthiness

Provides maintenance instructions for continued airworthiness of the G1000 systems.

Section 5: Troubleshooting

Provides troubleshooting information to aid in diagnosing and resolving potential problems with

the G1000.

Section 6: G1000 Equipment Removal & Replacement

Gives instructions for the removal and replacement of G1000 equipment associated with this

modification.

Section 7: G1000 Equipment Configuration & Testing

Gives instructions for loading software, configuring, and testing of G1000 equipment.

Section 8: System Return to Service Procedure

Specifies return-to-service procedures to be performed upon completion of maintenance of the

G1000 system.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 78 79

No comments

Garmin Software Version 0857.09 Instruction Manual Page 9