Garmin Software Version 0857.09 Instruction Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 79
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
G1000 System Maintenance Manual - Hawker Beechcraft G58 Page 5-3
190-01180-02 Revision 3
Problem Cause Solution
Electrical Fault Internal Fault Return to Garmin for service
Whisper Shout Fault Internal Fault Return to Garmin for service
Transmit Power Fault
Internal voltages are out of
tolerance
Verify input voltage and if it
continues return to Garmin for
service.
1030 MHz Fault Internal Fault Return to Garmin for service
1090 MHz Fault Internal Fault Return to Garmin for service
PA/LNA Fault
Antenna connections or internal
fault
Ensure all antenna connections
are correct otherwise return to
Garmin for Service
Receiver Fault
Antenna connections or internal
fault
Ensure all antenna connections
are correct otherwise return to
Garmin for Service
Transmitter Fault
Antenna connections or internal
fault
Ensure all antenna connections
are correct otherwise return to
Garmin for Service
Baro Altitude Fault
Baro Altimeter is not powered on
or improper wiring.
Verify that the baro altimeter has
power and is properly wired.
Improper configuration settings
Verify the configuration is set
correctly using the GTS 8XX
Install Tool.
Red ‘X’ on a data port on the
configuration page
Improper wiring; wrong port or
speed selected
Ensure the port is properly wired
to the GTS 820 and the correct
settings are selected on the
configuration page.
5.3 SOFTWARE/CONFIGURATION TROUBLESHOOTING
Problem Solutions
Software file load fails:
Ensure that criteria listed in Section 5.4 are
fulfilled for the applicable situation.
Ensure that LRU is reporting data on System
Status page (LRU is ‘ONLINE’). Check data
path wiring as needed.
Retry software file load or try using a different
card. Ensure that the MFD is not touched
during the loading process.
Ensure that LRU part number is compatible
with software version and Card Loader. Refer
to the General Arrangement Drawing and to
Section 3.6 of this document.
Replace LRU.
Configuration file load fails:
Ensure that the criteria listed in Section 5.4
are fulfilled for the applicable situation.
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 78 79

Comments to this Manuals

No comments