Garmin Appliance Data Quick Start Guide download pdf (Page 13)

190-00357-01 Rev H

NAVCOM PAGE / TERRAIN PAGE

NAVCOM Page

The NAVCOM Page provides a list of the airport commu-

nication and navigation frequencies at your departure, en route

and arrival airports.

Frequency

Category

Usage

Restriction

Information

Assigned

Frequency

Scroll

Bar

Departure,

En Route,

or Arrival

Airport

To Select a Frequency List for a Departure, En Route,

or Arrival Airport

1. Press the small right knob to activate the

cursor.

2. Turn the large right knob to place the cursor on

the airport identiﬁer ﬁeld (top line on the NAVCOM

Page).

3. Turn the small right knob to select the desired

airport and press ENT.

To Scroll Through the List of Frequencies

1. Activate the cursor, if not already active, by pressing

the small right knob.

2. Turn the large right knob to move the cursor

through the list of frequencies. If there are more

frequencies in the list than can be displayed on

the screen, a scroll bar along the right-hand side

of the screen will indicate which part of the list is

currently being displayed.

Auto-Tuning a Frequency from the NAVCOM Page

1. In the GNS 530W, highlight the desired frequency

by scrolling through the list of frequencies, as

described in the previous procedure.

2. To place a frequency in the standby ﬁeld of the

COM or VLOC window, highlight the desired fre-

quency and press ENT.

Terrain Page

To display the TERRAIN Page, select the NAV group and

turn the small right knob until the TERRAIN Page is displayed.

The page displays terrain information, aircraft ground track, and

GPS-derived MSL altitude (GSL altitude). Altitude is shown in

increments of 20 feet or in increments of 10 meters, depending

on unit conﬁguration.

For units with TAWS or installed in helicopters or equipped

with optional HTAWS, refer to 400W/500W Series Garmin

Optional Displays, P/N 190-00356-30 Rev G, or later.

To inhibit TERRAIN:

1. Select the TERRAIN Page and press MENU. “Inhibit

Terrain?” is selected by default.

2. Press ENT. The TERRAIN system is inhibited. The

annunciation is displayed in the terrain

annunciator ﬁeld whenever terrain is inhibited.

Obstacle Symbol

Unlighted Obstacle Lighted Obstacle Color TERRAIN/Obstacle

Location

< 1000’ AGL > 1000’ AGL < 1000’ AGL > 1000’ AGL

Red

Terrain/Obstacle above or within 100 ft below

current aircraft altitude

Yellow

Terrain/Obstacle between 100 ft and 1000 ft

below the aircraft altitude

Terrain Color Symbology

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comments to this Manuals

No comments

Garmin Appliance Data Quick Start Guide Page 13

Comments to this Manuals

Related products and manuals for Navigators Garmin Appliance Data